AMIKO A4K Combo

[william-1]

AMIKO A4K Combo
I have been testing this receiver for a couple of weeks now,



4K DIGITAL SATELLITE & T2 TERRESTRIAL / CABLE RECEIVER & MEDIA PLAYER POWERED BY ANDROID

Compact Design
One S2 satellite & one T2 terrestrial / cable hybrid tuner
One card reader
Fast & easy installation
64bit Quad Core 2.0GHz processor
8GB integrated flash memory
2 USB2.0 connections
Micro SD card expansion slot
Google Play™
YouTube videos
Based on Android™
Hundreds of thousands of available applications!
KODI media player support
Easy streaming to iOS, Android™ devices & PC’s
DLNA - Easy playback over local network
4K 2160p output via HDMI2.0
Ethernet connection & built in Wireless-N WiFi
Wired and wireless keyboard & mouse support
High quality digital surround sound via S/PDIF & HDMI
Low power consumption in Stand-By mode

Blind Scan works well finds UHD,HD & SD transponders,
UHD pics to follow.

 

[lovelyperson]

AMIKO A4K Combo
I have been testing this receiver for a couple of weeks now,

View attachment 112830

Thanks for that 'william'....reads well.

¿Assume that is your attached pic so I guess that the receiver can cope with BISS/CW emulation?

Merry Christmas and hope you enjoy your weekend.

 

[william-1]

 

[william-1]

More:-

 

[stephan94]

Hallo williams-1
how is the blindscan of this receiver? speed etc...

 

[william-1]

Hallo williams-1
how is the blindscan of this receiver? speed etc...

Astra @ 19.2 east 10700 to 12750 takes 10 min for the FTA Blind Scan to find all the active frequencies,
Then it takes 4 min to add the channels to the data base.
You can select V or H or All polarizations.

 

[william-1]

During the Blind Scan the found transponders go in sequence in the data base,
Next Blind Scan:- 10 east & 9 east

 

[william-1]

The Blind Scan is split into 4 bands currently unselectable by the user,

High Band H 11560 to 12750
High Band V 11550 to 12750
Low Band H 10700 to 11900
Low Band V 10700 to 11900

I also observed that they overlap

 

[stephan94]

Thank you Williams-1 a lot for the answers.
another question:
until what little SR works the blindscan (for example the SX88 does not find in SR1600)?
the 3 ° 1 East satellite is the right satellite to check that.
how much MhZ is the minimum separation between two frequencies?
Good parties of New Year.

stephan94;)

 

[william-1]

I will check out the low symbol rate Blind scan on Eutelsat 3B & 21B.

 

[william-1]

Symbol rates as low as 1500 found with the A4K Blind Scan,
Active transponders found within 3 MHz range,
Screen shots to follow.

 

[william-1]

I have deleted all symbol rates below 1600 from the A4K data base for Eutelsat 3B @ 3.1 east before I start the Blind Scan test.

 

[AndyX]

I have deleted all symbol rates below 1600 from the A4K data base for Eutelsat 3B @ 3.1 east before I start the Blind Scan test.

Hey William, should you not have waited till tomorrow before unpacking your Xmas pressie?

 

[william-1]

 

[sat-tv-fan]

How much better is this compared to the Amiko A3 ? Shame no USB 3.0

 

[AndyX]

I have deleted all symbol rates below 1600 from the A4K data base for Eutelsat 3B @ 3.1 east before I start the Blind Scan test.

I guess the tests did not go well as no news here!

 

[william-1]

The test was fine found all active transponders on 3.1 east.

 

[AndyX]

The test was fine found all active transponders on 3.1 east.

Is this now your prefered receiver?

 

[william-1]

Yes it is my preferred receiver for DTH TV,
I much prefer the TM5502HD for feed hunting with the inbuilt spectrum analyser I can find feeds much quicker as I can select what part of the Ku band I want to scan.

 

[RustySpoons]

What's Android like for Satellite stuff, is it easy enough to tune, add transponders, set up a motorised dish etc?
Looks quite interesting that box.