amos 2/3

jpsr

Regular Member
My Satellite Setup
1.2 channel master, cm polar mount, 12 inch actuator, Andrews feedhorn, Inverto lnb, Superjack positioner, Dreambox dm 500s, Protek 9600ip, 1m channel master with black ultra & 1m gibertini with technomate twin output lnb on astra 1/2, TM 5200 & 1000
My Location
Mullingar, Ireland
Does anyone know if its possible to recieve amos 2/3 at 4w in ireland.
 
jpsr said:
Does anyone know if its possible to recieve amos 2/3 at 4w in ireland.

Which channels are you interested to receive?
The ones on the Middle East beam would be quite difficult to receive, but if you are interested in the ones on the European beam, then it might not be that difficult.
See the FP from Lyngsat. 240-300 cm dish should do it.

_http://www.lyngsat-maps.com/maps/amos2_eur.html
 
HB13DISH is spot on jpsr...
Even though Lyngsat shows the European beams 'technically' out of footprint ..
I have no trouble getting some of them in Manchester on my TD110..

So I'm guessing you should get reasonable results at your location...assuming its the Euro beams you are after ?

good luck
VS
 

Attachments

  • screenshot.webp
    screenshot.webp
    68.1 KB · Views: 62
  • snapshot.webp
    snapshot.webp
    25.6 KB · Views: 48
Ye its the european beam im after. I moved my 1.1 triax connected to my dreambox and couldn get anything. I didn try that hard. Ill try it with the technomate as the tuner is a bit better.
 
110cm Dish here in N.Yorks gets 10772 H 27500 and 10759 H 30000 only.
 
Back
Top