hi m8s heres my problem im getting from 10 east to 8 west ok but either side of that im dropping out now should i alter dish elavation on dish bracket or elavation on motor bracket or both not sure which 
arc problem help
- Thread starter frankie13
- Start date
- My Satellite Setup
- See signature
- My Location
- Northants, Midlands UK & Lanzarote, Canary Islands
Hi, make sure:
> Motor inclination is set correctly for your Latitude.
> Fixing brackets/pole are plumb.
> Motor is secured on centre of motor shaft when at zero position.
> Adjust dish/motor together around the pole and by dish EL to achieve the best signal on 1W (ref sat).
> Motor inclination is set correctly for your Latitude.
> Fixing brackets/pole are plumb.
> Motor is secured on centre of motor shaft when at zero position.
> Adjust dish/motor together around the pole and by dish EL to achieve the best signal on 1W (ref sat).