astra 19.2 e

[comber]

could someone please let me know how many channels i should be getting im not getting any of the german and french channels
only getting 350 channels thankl you
]fortectstar
1 metre motorised

 

[Analoguesat]

Name a few channels you are getting - theres a good chance you are aligned onto the wrong satellite

 

[Lazarus]

_http://www.flysat.com/astra19.php

I'm sure your counting ability is the match of anyone elses

Assuming you are on the correct Satellite (Analoguesat has already queried this!):

Can you list a few specific desired Channels you aren't getting: That way we can see if you are missing one Polarity or one Band (due to faulty LNB or incorrect LNB setting in the Receiver) or possibly if you have a Skew problem (very likely if you are using a Fortec Star LN.

Is this a new system or is it an old system that previously worked?

Not enough info so far ..................

 

[comber]

Name a few channels you are getting - theres a good chance you are aligned onto the wrong satellite

channel 4
film 4
bbc channelsitv
disney
sky horror
mtv
vhi
etc

 

[satelliteman]

channel 4
film 4
bbc channelsitv
disney
sky horror
mtv
vhi
etc

Your on Astra2 @ 28°e.

For Astra1 you need to move the dish 9° in a Westerly direction.

 

[comber]

Your on Astra2 @ 28°e.

For Astra1 you need to move the dish 9° in a Westerly direction.

just got this system what transponder should i start with please
all so confusing

 

[Lazarus]

just got this system what transponder should i start with please
all so confusing

Have you set up this motorised system or was it installed for you?

If it is correctly installed (by whoever!), then just find Astra 1 in your Satellite list.

The motor should drive the Dish to 19.2E and then all you need do is Scan.

(Still not enough info .............)

 

[comber]

Have you set up this motorised system or was it installed for you?

If it is correctly installed (by whoever!), then just find Astra 1 in your Satellite list.

The motor should drive the Dish to 19.2E and then all you need do is Scan.

(Still not enough info .............)

it was installed for me
had it all pretuned ,but i done a factory by mistake so am trying to
get all the satellites back ,got 5 back so far now
astra got them now do you no where iacan get thr right transponders codes please...

 

[Lazarus]

it was installed for me
had it all pretuned ,but i done a factory by mistake so am trying to
get all the satellites back ,got 5 back so far now
astra got them now do you no where iacan get thr right transponders codes please...

Well done on making progress!

Look at Post #3 : I posted a link to a listing there.

Mind you, it would be much easier if you did an Auto/Blind Scan if the Receiver permits. Saves a lot of manual data entry.

 

[comber]

Well done on making progress!

Look at Post #3 : I posted a link to a listing there.

Mind you, it would be much easier if you did an Auto/Blind Scan if the Receiver permits. Saves a lot of manual data entry.

i bought a mp02 positioner save a bit of time am using flysat but but some of them transponders dont seem to work ,

 

[Lazarus]

i bought a mp02 positioner save a bit of time am using flysat but but some of them transponders dont seem to work ,

They should be - that's the point. However, don't forget kingofsat.net or lyngsat also carry them.

If they aren't working, perhaps your factory reset ( ) has affected your LNB settings? "Universal" required.

 

[agbell]

I have SilverCrest SL 65 receiver set on Astra 1B 19.2E.
It used to get the Vox channel,RTL etc but now no signal. It is mainly German channels that i'm after. Advice please.

 

[redout]

I done a scan on 19e yesterday with a 1m in Dublin and picked up I think just over 1,500 services in total just to give you an idea.