Astra 2 10.906 V

trigger

trigger

Specialist Contributor
My Satellite Setup
30W, 27.5W, 7W, 0.1W
4.8E, 9E, 13E, 19E, 23.5E, 26E, 28E
Technomate 5402HD super
Bein Sports on 25.5E
FTE Mini S2T HD Analyser
Horizon HD S2 sat meter
My Location
Lanzarote, Canary Islands
Good evening

This transponder is still active with signal but has lost all its Channels!

Was carrying ITV, STV, UTV, ITV3 & ITV3 +1. All SD

Could someone have a look to see if these channels have appeared on the other transponders used by ITV etc. should be easy to spot the STV UTV & ITV 3 SD as they were only on this transponder.

Thanks
 
several whinges in the Canaries.
ITV regions - full signal, but no picture or sound!
specifically ITV HD London 19832 H
 
10.758 V is still transmitting I believe.
 
Assume you mean 10.832.

As mentioned in another post 10.906 is not working either
 
yep - sorry - finger troble typing transponder numbers!!
Threads got double posted - choose one to delete??
 
Must be a transmission fault. 10832H channels all at black level here
 
Analoguesat has chosen this one - good enough for me.

Perhaps they are having a "dry run" switching off the ex-pats before 2E Launches -

Just forgot it affects other UK regions.
I wonder how quickly Sly can remap the channels in events like this??
 
Quite a few ITV transponders are still showing black for me too.
 
What would be the cause? Hardware failure at ITVs uplink station?.. Must be quite serious to not have it fixed already
 
I now get "No Audio/Video" on 10832H, 10891H, and 10906V
 
Is it doing the same thing on a Sky Digibox. I have no idea where mine is to check. It was up the loft last time i saw it about 18 months ago.

Nano
 
Going by the amount of postings on the expat forums in the last hour Nano, I'd guess so......
 
Several tp's have been down a couple of hours - although most if not all have just come back on - mid programme & no apologies in vision (Ive got the sound off just monitoring the vision output).
 
timo_w2s said:
I now get "No Audio/Video" on 10832H, 10891H, and 10906V
Click to expand...
These all look OK to me, although as AS has said they've all come back then this isn't surprising :)
 
timo_w2s said:
I now get "No Audio/Video" on 10832H, 10891H, and 10906V
Click to expand...
If you are still down reboot the receiver, all sd channels seem to be ok now.
 
Analoguesat said:
If you are still down reboot the receiver, all sd channels seem to be ok now.
Click to expand...
No, it's all fine now here too.
 
nano said:
I bet the ex pats were cacking it :-lmao
Click to expand...
Yes, especially as it had taken 'Emmerdale' off.......I had an English friend from the other side of the village come round in his car just to check he hadn't pressed the wrong button on his remote....
 
Back
Top