Hi all, new here. Drawn here by all the fuss on 2F, hope to stick around after the 2F excitement has died down. Here's my reception report from Maranello, NE Italy for 11023H. Readings taken from Foxsat HD box, 1,2m offset dish & Black Ultra quad.
Friday 23/11: 0% Signal 0% Quality
Saturday 24/11: 0% Signal 0% Quality
By this stage was getting a bit dispondant, then suddenly this morning...
Sunday 25/11 80% Signal 60% Quality. Rock Solid, perfect picture.
My set up is working perfectly, and has been all the way through. On all the 1N TP's I'm receiveing 100%/100%. The change is definately at SES end.
Hoping that it stays that way for me right now.
Cant remember any & I dont think we have many active members much north of the Edinburgh-Glasgow line
that is data from 1N pan europe beam long time it is on flysat and lyngsat.i got signal 0.25 db on 11185h it from 2f spot beam ?
dont have see change on thats tps , can't say its 2f .vladan10@
thanks for response it was very low signal quick gone at morning
i know 11185v on astra 1n
now i see two signal strong 11730v and 11876h
11.30c/n maybe it start 2f pe beam ?
I think my Humax Foxsat must be playing up.
Manual Search in non-freesat mode.... choose 11023H SR23000 2/3 etc. and not a sausage. I can't imagine that Barcelona is in some kind of bubble.....
You can upload up to 50.33K of files (Max. single file size: 50.33K)dont have see change on thats tps , can't say its 2f .
Please post images as an attachment and upload it to our server, IMG removed [Admin]
My Costa Cálida location shows no change from first acquisition.
100% Q 100% Strength both 1-N and 2-F.
834 8911
833 8901
Using 1.8 and Invacom Quad, and Mac "EYE TV" software, or Humax.
Stable and fully-locked. No pixelating.
Getting a Humax RX to receive these test TXs wasn't easy and took some patience, eventually, with all the correct parameters, it worked fine and displayed perfect pictures.
befor i post i do all that mod but cantYou can upload up to 50.33K of files (Max. single file size: 50.33K)
where is the uploader ?
Mod Note : Select "Use Full Editor" (Next to Save button), then you'll see the Attachment Manager
You are pressing the Save button after entering the parameters?
If you don't, the bars stay resolutely inert.
I press "save" but it all stays at zero. The transponder doesn't "stay" saved either... I'm thinking there has to be some obscure antenna setting parameter which is not right. But that said, my current Frresat reception on all channels is very good.
Where is the map?Ive updated the map wityh this mornings information. Not many extra records - half a dozen or so.
The BBC were quite happy to transmit on 2D and that covered much more ground, so I can't see why they would be complaining now.SES-Astra might be getting flak from the Beeb after seeing reports that reception is covering all of France,eastern Spain
etc etc