altis
Archived Member
- Joined
- Dec 20, 2004
- Messages
- 33
- Reaction score
- 0
- Points
- 0
- Age
- 44
- My Satellite Setup
- MYOB
- My Location
- MYOB
Having finally set up my 85cm dish on my Metronic Diseqc motor I'm alarmed by how much it has to struggle sometimes. This is because the centre of gravity of the dish, on an arm, on another arm is far away from the axis of the motor.
It should be fairly easy to design a dish and mount so that the axis of the motor passes right through the CoG - much like a radar dish. Does nobody make one?
It should be fairly easy to design a dish and mount so that the axis of the motor passes right through the CoG - much like a radar dish. Does nobody make one?