Best results LNB ????

S

Snuffer

Regular Member
My Satellite Setup
Skystarcard,Fortec's life time ultra's, MaxPlus 2100's,Dreambox and a Tandberg
My Location
Amsterdam
What LNB Quad have the best results with a 120 Cm Fibo dish.

Invacom Quad is in use here now but there are Iverto and MTI also i think
It MUST BE A QUAD for 4 recievers.
 
Inverto work well. But ive only seen the twin outputs, not sure they make a quad.
 
I researched this last year, by looking at various reviews and recommendations etc

Came up with an invacom, http://www.nil-dan.de/html/lnb_invacom_quad.html

It improved my fringe reception on Hotbird by 20-30% (Although I did have a cheap local LNB at the time)

Might be worth checking a few reviews again, I'm consious that the techology moves pretty quickly......
 
Hello!
i have an old smw xline 800 Lnb,and i want,to fix it on the fibo antenna,but,the conection,looks complitly difrent,inside,what,type,of polareizer,is needed,that the conection on both size,is compatible?

i contacted smw,in Sweden,but they cannot help me!:(
 
The SMW LNB is a WR-75 LNB and not the usual C120 flange LNB you are most often seen in the shops.

SMW needs an OMT or a polarizer or ferotor of some sort to connect to the feedhorn.
 
Hello Thx,for your answer,where,i find an omt,i dont have any!

have,hirschmann csp 1210 polareizer,but,i dont find it at the moment,must seach it:)

iam not sure,is the hirschmann compatible or not,i was thinking,smw has the right stuff..

does any one,testet the smw lnb kuband on www.smw.se
website,does it perfom better,then the old x 800 Series?
 
Turok said:
Hello Thx,for your answer,where,i find an omt,i dont have any!

have,hirschmann csp 1210 polareizer,but,i dont find it at the moment,must seach it:)

iam not sure,is the hirschmann compatible or not,i was thinking,smw has the right stuff..

does any one,testet the smw lnb kuband on www.smw.se
website,does it perfom better,then the old x 800 Series?
Click to expand...

Yes you can use the Hirschmann CSP1210 polarizer, it is compatible.

Just install the SMW LNB to the flange output on the Hirschmann polarizer.

Oh..i found a picture of the same setup.

35307998_3f1f33f0ef_m.jpg
 
Phillips have aslo one named:

Polarizer SCC 100/01R
 
Back
Top