• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Camd key probs

rogue_element

Regular Member
Messages
69
Likes
0
#1
Hi there

I seem to be having some trouble getting the keys I have for D+ & cabo working. I dl'd the keys from the jkf site flashed them to the box in var/keys using dcc restarted the box and I still have a black screen. I upgraded the emu to camd3.883 reflashed the keys and still nowt. This is not the 1st time the box has done this, last time the only cure I found was to start afresh with a new image then flash the keys and it worked:confused

I cant keep doing that every time new keys come out.

Thanks in advance
R_E
 

Llew

cerca trova...
Staff member
Messages
14,318
Likes
3,282
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#3
Are you using the latest emu with the D+/Cabo AU files removed? That's necessary now.

(Only a TD man myself, but use the same files)

Llew
 

rogue_element

Regular Member
Messages
69
Likes
0
#4
Hi, thanks for the help

Not to sure what you mean, the emu itself I d/l'd from the Gemini blue panel (is there something I need to remove?), the keys were the set posted as D+ au removed.

I think I might try newcamd tonight, if I get a chance.

Thanks once again for the help

R_E
 

rogue_element

Regular Member
Messages
69
Likes
0
#5
Got it working ;)

I dl'd satans key bundle and replaced var/scce and var/keys, for now at least I have 30W open with newcamd (seems slooooooow to open channels though) will give camd a go later.

Thabks for the help.

R_E
 

Llew

cerca trova...
Staff member
Messages
14,318
Likes
3,282
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#6
Sorry, should have mentioned I was using mgcamd with softcam keys minus AU, no problem on TD.

Camd3 keys should be similar.

(Edit - glad you sorted it :) )

Llew
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
19
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#7
valid keys die very quickly especially D+

satandream is good but JKF is best for up to the minute new keys.

I use evocamd and D+ is working.

FTP keys into var/keys and scce into var/keys

keylist.txt goes into var/keys

JKF has a sticky with "what files go where" for each emu.

30W is always slow to decrypt (in my experience).
 

BonceChops

Regular Member
Messages
259
Likes
0
My Satellite Setup
Dreambox 500, Dreambox 600PVR, Dreambox 7025+, Dreambox 7000, 1m dish on a Moteck SG2100
My Location
NW England
#8
I find it is more reliable switching the cam to common interface, then copying files or use blue menu. Then switch back to your cam after installing the new keys.
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
19
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#9
Just restart the cam. Works fine everytime :)
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#10
Using Satans Myself the last while everything ok, sometimes have to edit the keyfile to update D+ when the files havent been released. All ok using camd3,newcamd3,
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,653
Likes
1,272
My Satellite Setup
See signature
My Location
Berkshire
#11
Yes, satan's bundle works well, also now with PLi Garnet image, you don't have to uninstall the old bundle, you just load over the top. :)