godzillafan
Regular Member
- Joined
- Apr 20, 2011
- Messages
- 481
- Reaction score
- 10
- Points
- 18
- My Satellite Setup
- T90, 1 black ultra HighGrain Quuad, 20 smart lnb (2 twins), 16/1 diseqc switch, 2x emp 4/1, S9HD, Vu+ Uno,
- My Location
- South Wales
Hi Guys
Most likely a silly question, but had to ask what the CI and other slots in the receivers actually do.
Reading the CAM site and some thread mention CAM are old tech and dont work!
Planned a setup and some great advice from you guys.
Went with 8 lnb's - also had to make sure that new receiver had channel memory.
Noticed the receivers came with CI slots and other slots.
Confused if cams dont work - how do you program CI cards to put into these slots.
Maybe I read too many posts and starting to get confused.
Bascially thought great ideal - and will bound to get some channels that are blocked and a card might help to open them. I understand some will and some wont - its all try and error.
I have a laptop about 2 months old.
mainly USB's so what budget cam programmer and CI card can you use on a laptop?
cheers vik
ps cas 3 interface and Diablo Light v2.3 is mentioned alot
Most likely a silly question, but had to ask what the CI and other slots in the receivers actually do.
Reading the CAM site and some thread mention CAM are old tech and dont work!
Planned a setup and some great advice from you guys.
Went with 8 lnb's - also had to make sure that new receiver had channel memory.
Noticed the receivers came with CI slots and other slots.
Confused if cams dont work - how do you program CI cards to put into these slots.
Maybe I read too many posts and starting to get confused.
Bascially thought great ideal - and will bound to get some channels that are blocked and a card might help to open them. I understand some will and some wont - its all try and error.
I have a laptop about 2 months old.
mainly USB's so what budget cam programmer and CI card can you use on a laptop?
cheers vik
ps cas 3 interface and Diablo Light v2.3 is mentioned alot