Cannot get Digitv. Any problems at the moment or is it gone totally?

D

demonknight9

Member
My Satellite Setup
COMAG SL100HD-2CI PVR READY-60cm DISH-UNIVERSAL SINGLE HD READY LNB-MOTOR 1.2 USUALS - DIABLO LIGHT 2.3 W/ CAS 3+ INTERFACE
My Location
Kent UK
Got reception on the majority of the transponders on thor. Just got a diablo light 2.3 and can open the premier on astra, also can open some channels on thor like disney and one other. Updated the cam with cas 3+ but still wont open anything else on thor. Can anyone help with what channels are open on what transponders?

Thanks in advance:-worship
 
All the channels in the Digi TV package are open, except for the 2 film channels, which are now only nagra 3.
Have you turned Emulators ON, in the configuration menu and loaded the latest keys bin file?

Code: 
http://www.lyngsat.com/packages/digi.html
 
I did yes Mickha. Thanks for replying so quickly. I used fausto editor 1.26 and the latest keys bin. The instructions on how to do it were in this forum somewhere. Analoguesat explained how to do it with fausto and twinbase manager. I did not use twinbase manager, I used fausto to prepare the keys and cas 3+ to transfer. Deleted the keys.bin from the cam and put the new one from yesterday in it, that is how it's done isn't it?. Keys were from a good source as well, it still says keys expired on some channels when I first tune in. should I reload underworld and stealth and the latest keys again? I have 1.94 by the way, I think that is the latest one? When I bought the cam it already had it on so I don't know what stealth is on the cam as I don't know how to check that. Emulators are on by the way, cw is on, the only 2 that are off are pmt and n2 au
Mickha said:
All the channels in the Digi TV package are open, except for the 2 film channels, which are now only nagra 3.
Have you turned Emulators ON, in the configuration menu and loaded the latest keys bin file? Emulators are on by the way, cw is on, the only 2 that are off are pmt and n2 au

Code: 
http://www.lyngsat.com/packages/digi.html
Click to expand...
 
If Emulators are turned ON in the configuration menu then check that N2 AU is turned OFF, if both these settings are correct then manually check the keys, go into the Cams menu, Keys, List Keys Edit, Nagravision 2, Digi TV, Key 86, there you can check if the key 00 from 5/12/09 are correct.
 
Ok, N2 AU is off all emulators on. Checked key with key from one i've got and it is the right one. What do you mean by key 00? I have checked key 86 but it does not have a 00 to start with so I do not know what the 00 means although I have seen it mentioned before in another post. PMT is turned off at the moment as well. Thank you, it's the oly one that I haven't managed to get to work is digitv, tv globo is working as well as premier and a few other scattered channels.
Mickha said:
If Emulators are turned ON in the configuration menu then check that N2 AU is turned OFF, if both these settings are correct then manually check the keys, go into the Cams menu, Keys, List Keys Edit, Nagravision 2, Digi TV, Key 86, there you can check if the key 00 from 5/12/09 are correct.
Click to expand...
 
Key 86 is Key 00 but make sure that you have the correct keys from 5/12/09.
If they channels still aren't opening try re-booting your receiver, then try deleting a few channels and re-scanning them in.
If it still doesn't work try turning Auto PMT ON, if still nothing format your Cam, load Underworld 194, but do not update the keys bin file.
When the Cam is in your receiver, go into the Config menu and turn Emulators ON, then go to the Keys menu and manually enter the keys for Digi TV.
 
I must be doing something really wrong. Did exactly what you instructed, tried all the first options then formated the cam as it didn't work. I then upgraded the cam with the latest underworld and did as instructed, did not load the keys, no channel would work even the premier ones, tv globo did not work either, insterted the keys for digitv manually and nothing, no chanells work on thor like before, then I inserted the tv globo key and it didn't work as the keys changed tonight I think. So wen't back on the pc and loaded the latest keys and all works apart from tv globo and digitv. It's doing my head in now. Hope you can help me.
Mickha said:
Key 86 is Key 00 but make sure that you have the correct keys from 5/12/09.
If they channels still aren't opening try re-booting your receiver, then try deleting a few channels and re-scanning them in.
If it still doesn't work try turning Auto PMT ON, if still nothing format your Cam, load Underworld 194, but do not update the keys bin file.
When the Cam is in your receiver, go into the Config menu and turn Emulators ON, then go to the Keys menu and manually enter the keys for Digi TV.
Click to expand...
 
It could be a receiver problem, although as other channels are opening it is unlikely. Try it on AXN Sci Fi, 11901 H 28000, also try an earlier Underworld file, Underworld 191 worked for me.
Are you sure you have the correct keys entered? Just one error and it wont work.
 
I know what the problem is now, I have an obstruction and can only get certain transponders. I will be moving the dish today and hopefully will be able to get digitv. Thanks for your help Mickha.
Mickha said:
It could be a receiver problem, although as other channels are opening it is unlikely. Try it on AXN Sci Fi, 11901 H 28000, also try an earlier Underworld file, Underworld 191 worked for me.
Are you sure you have the correct keys entered? Just one error and it wont work.
Click to expand...
 
Back
Top