Card shairing Receiver

Messages
30
Likes
0
#1
Hi Guys.
Today i got a new receiver It Name Future DVB-S FR1010.
and this receiver i thing its card shairing system we hav to connect a sepaate LNB dish for
Scramble channels. and this revceiver will open all Nile sat scrable channels.
i want to know whare can i get latest flash files firmware files.

to program this receiver we have to use two data cables one is master and another is slave.
software name is TwinPlus.
if anyone know anything about this receiver or flash files/ support side, please reply to me.

Regards.
 

Analoguesat

Administrator
Staff member
Messages
45,774
Likes
8,410
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#2
Nilesat channels are in Irdeto-2 They are secure, so if you want them, you pay for them..... (or cardshare them but you need someone with a valid subs for that)
 

Analoguesat

Administrator
Staff member
Messages
45,774
Likes
8,410
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#6
pmmali said:
That name is not available.
i thing Importer of this receiver they are change the receiver name.

Its a rebadge job. You need to do some research to find out what its based on.
 
Messages
2
Likes
0
My Satellite Setup
Nilesat & Hotbird
My Location
Cyprus
#8
Hi Everybody

I have Future FR1010 and here in Cyprus it is sold widely in the Market
I have 2Dish 1.2M one is on Hotbird & Nilesat and the other for the DATA for the card sharing it gets the codes for Showti*e & Nov* I think its alligned on truksat.

This reciever has a lot of problems because we cant download the software or find it on the web I get the software from the person that installed it.

And every couple of months I have to wait until the give me the new software or some time they change the data dish allignment to another sat.

Pls anybody that has more information about the FUTURE FR1010 contact me

Note all the above information are for Educational purposes.

Regards From
CYPRUS :D
 
Messages
2
Likes
0
My Satellite Setup
Nilesat & Hotbird
My Location
Cyprus
#9
pmmali said:
I want know about whare can i get the latest firmwars for this receiver.

Regards.
you need A special Cable to update with switch 1 and 2 to do the change
and also there is codes for the reciever to unlock softcam but no information on the net I can give you some codes if you want and what are the information you have found about the FR1010

Below is how to upgrade::::::D

HOW TO UPGRADE THE BOX

1- DOWNLOAD THE UP LOADER twinplus FILE HERE (DOWNLOAD) or here AS RAR (DOWNLOAD)

2- DOWNLOAD FILE NUMBER 1 HERE ( FILE 1 )

3- DOWNLOAD FILE NUMBER 2 HERE ( FILE 2 )

4- CONNECT THE CABLE TO YOUR COMPUTER AND TO YOUR BOX SWITCH THE BOX OFF FROM SWITCH BEHIND

THE BOX

5- INSTALL THE FILE TWINPLUS IN YOUR COMPUTER .

6- OPEN THE PROGRAM OF TWINPLUS AFTER INSTALLATION MAKE SURE OF THE CORRECT COM PORT

7- WHEN THE TWINPLUS PROGRAM OPEN PRESS ON OPEN BUTTON AND LOAD FILE NUMBER 1

8- ON THE CABLE THAT YOU HAVE SWITCH IT TO NUMBER 1 AND MAKE SURE THE RECEIVER STILL OFF.

9- PRESS DOWNLOAD IN TWIN PLUS U WILL SEE COUNTER FROM 30 GOING DOWN IE: 30-29-28

NOW SWITCH THE ON BUTTON FROM BACK OF THE RECEIVER THE PROGRAM WILL STOP COUNTER AND START TO

UPLOAD WAIT AROUND FEW MINUTES HE WILL SAVE AFTER WRITE FINISH .





STEP 2:

SWITCH THE RECIEVER OFF AGAIN FROM THE BACK SWITCH

PRESS ON OPEN BUTTOM AND LOAD FILE NUMBER 2

ON THE CABLE THAT YOU HAVE SWITCH IT TO NUMBER 2 AND MAKE SURE THE RECEIVER STILL OFF.

PRESS DOWNLOAD IN TWIN PLUS U WILL SEE COUNTER FROM 30 GOING DOWN IE: 30-29-28

NOW SWITCH THE ON BUTTON FROM BACK OF THE RECEIVER THE PROGRAM WILL STOP COUNTER AND START TO

UPLOAD WAIT AROUND FEW MINUTES HE WILL SAVE AFTER WRITE FINISH .



TAKE OUT CABLE AND CHECK THE CHANNELS SHOULD BE OK
 
Messages
1
Likes
0
My Satellite Setup
Future FR1010
My Location
Iraq
#10
Hi,
I have future FR1010 and it get used to open showtime and many other channels , but every 2 months the signal go away and we couldnt open showtime and ART ,so I rather to take it to a fixer who tells me that it is ned to update and he update it with some software and he go to some websites , each time when I ask him to tell me which websites he goes and what softwares he use to connact the reciver to the PC , so I can do it by my self from my home , He refused all the time and say it is a big seucrit that no one knows it but him , and each time he take $25 from me to update my future FR1010 reciver so the showtime and the rest of channel can open .
My quastion : can I get these softwares to be use just with future Reciver FR1010 ? where ?
Can please explain to me how can I update it ? and where can I fined the updates ?

Thank you for your help
 

d122k7trb

Judas Priest
Messages
268
Likes
1
My Satellite Setup
IClass Receiver
2 Premium X LNBs Hotbird+ Nilesat
120" Dish

Computer system:
AMD Phenom Quad quad core 9750
4GB DDR2 Bus 800 RAM
MB: Asus Crosshair
1 TB Seagate Barracuda 32 MB cache
22" LCD Widescreen Samsung 226BW
SB X-Fi Xtreme
My Location
Armenia, ME: The Arab Countries
#11
Here in Iran, Armenia and The ME also is taking action the replacement of that new generation of receivers that are mostly "Technosat" and "Eurosat". I'm not sure of the second one but they have two dishes 120 cm one is for getting channels from Hotbird and may be Arabsat and the other one is for its update for hex codes and etc. I'm not sure exactly 'coz I ain't seen it yet. I'm writing what I've heard from here and there.
I can ask from my friends adjusting this types of receivers and then give you a rference or the ways of udating and so on.

Arbi.
 
Messages
1
Likes
0
My Satellite Setup
DREAM MAKER
My Location
CYPRUS
#12
cyprus said:
you need A special Cable to update with switch 1 and 2 to do the change
and also there is codes for the reciever to unlock softcam but no information on the net I can give you some codes if you want and what are the information you have found about the FR1010

Below is how to upgrade::::::D

HOW TO UPGRADE THE BOX

1- DOWNLOAD THE UP LOADER twinplus FILE HERE (DOWNLOAD) or here AS RAR (DOWNLOAD)

2- DOWNLOAD FILE NUMBER 1 HERE ( FILE 1 )

3- DOWNLOAD FILE NUMBER 2 HERE ( FILE 2 )

4- CONNECT THE CABLE TO YOUR COMPUTER AND TO YOUR BOX SWITCH THE BOX OFF FROM SWITCH BEHIND

THE BOX

5- INSTALL THE FILE TWINPLUS IN YOUR COMPUTER .

6- OPEN THE PROGRAM OF TWINPLUS AFTER INSTALLATION MAKE SURE OF THE CORRECT COM PORT

7- WHEN THE TWINPLUS PROGRAM OPEN PRESS ON OPEN BUTTON AND LOAD FILE NUMBER 1

8- ON THE CABLE THAT YOU HAVE SWITCH IT TO NUMBER 1 AND MAKE SURE THE RECEIVER STILL OFF.

9- PRESS DOWNLOAD IN TWIN PLUS U WILL SEE COUNTER FROM 30 GOING DOWN IE: 30-29-28

NOW SWITCH THE ON BUTTON FROM BACK OF THE RECEIVER THE PROGRAM WILL STOP COUNTER AND START TO

UPLOAD WAIT AROUND FEW MINUTES HE WILL SAVE AFTER WRITE FINISH .





STEP 2:

SWITCH THE RECIEVER OFF AGAIN FROM THE BACK SWITCH

PRESS ON OPEN BUTTOM AND LOAD FILE NUMBER 2

ON THE CABLE THAT YOU HAVE SWITCH IT TO NUMBER 2 AND MAKE SURE THE RECEIVER STILL OFF.

PRESS DOWNLOAD IN TWIN PLUS U WILL SEE COUNTER FROM 30 GOING DOWN IE: 30-29-28

NOW SWITCH THE ON BUTTON FROM BACK OF THE RECEIVER THE PROGRAM WILL STOP COUNTER AND START TO

UPLOAD WAIT AROUND FEW MINUTES HE WILL SAVE AFTER WRITE FINISH .



TAKE OUT CABLE AND CHECK THE CHANNELS SHOULD BE OK
COULD YOU SUPLLY ME WITH THE LINKS AS THEY DONT WORK THANKS
 
Top