cascade problem

Status
Not open for further replies.
A

alan1572

Member
Messages
26
My Satellite Setup
BASIC MOTOR SET UP
My Location
LANCASHIRE
not sure where to put this so sorry if it's in the wrong bit.
got a bit of a problem with a cascade system, all five floors (except the top floor)have 1 tap (varying losses) and 1 mains powered multiswitch, the 2nd floor is having problems with reception on sky, the quality is at about 75% but the strengh is virtually non existent, i have today swapped the multiswitch and tap but the problem is still there, i have run cables from the multiswitch straight to the sky+ box as to by-pass the cables in the walls but that didn't help either, there have not been any reports of problems from any of the other 4 floors...any ideas
 
satelliteman

satelliteman

Administrator
Staff member
Messages
12,029
My Satellite Setup
See signature
My Location
East Midlands, UK & Lanzarote, Canary Islands
Test, measure IF signals at source. This section is for Domestic only.

Thread closed.
 
Status
Not open for further replies.
Top