cccam 2.x.x to default ?

[leffep]

Hello!
I have a little problem: I use cccam, but after i switch off the box (i completely take the power off) the box started with common cam, Are there any way to make cccam to default cam?
My box are a china clone of DB 500 S

 

[Analoguesat]

What happens if you just leave it in standby?

Unfortunately this sort of problem is fairly common on clone boxes as they are pretty crap quality.

 

[td03-5]

Hi Leif,

Select CCcam and start it. Next, hold the power button on the Dreambox remote control until the reboot/shut down menu appears...select Restart (or Reboot)...once the box has completed the reboot, CCcam will be the default, even if you completely disconnect the power.

Best wishes, John.

 

[A nonymous]

When its booted up, press the blue button and press either left or right until you see CCCam. Press OK to restart cam.

This should now be set as the default cam

Nano

 

[td03-5]

No @nanochickin, it will not be set until you do a reboot as I describe above.

If Common Interface is the current default and you select CCcam and start it, then you pull the power plug, it will start Common Interface next time you power up.

Do as I say above and then after reboot pull the power plug or any other means of hard rebooting and it will start CCcam.

Best wishes, John.

 

[A nonymous]

Yes your correct, i should have mentioned to restart enigma on an enigma1 box.

Not an issue on the Vu+.

Haven't had to play with Enigma 1 for quite sometime

 

[leffep]

No @nanochickin, it will not be set until you do a reboot as I describe above.

If Common Interface is the current default and you select CCcam and start it, then you pull the power plug, it will start Common Interface next time you power up.

Do as I say above and then after reboot pull the power plug or any other means of hard rebooting and it will start CCcam.

Best wishes, John.

Yess!
This made may day. Now is cccam default.
THANK YOU !