Channel Master 1m

remlap

Specialist Contributor
My Satellite Setup
Gibertini 104cm motorised dish with a Technomate 5402 HD CI+ and TBS 6925 + Gibertini 90cm with 9E 13E 19.2E and 28.2/5E with a Hauppauge WinTV NOVA-HD-S2 Media Centre PC and Pure EVOKE Flow Radio + 100cm Channel Master with 2 LNBs at 24.5W and 30W
My Location
Wales
Got my hands on a Channel Master 1m used for Tooway internet there was damage to the outer rim of the dish and face.

Did a repair with polyester fibreglass filler from Halfords, spray painted the rim with Ford Polar Grey also from Halfords.

It will need a little bit of touching up on the face of the dish when I can find a more matched colour.

Currently set at 30w but looking to find 24.5w or 37.5w when weather is better.

Photos continue below...
 

Attachments

  • Dish 1.webp
    Dish 1.webp
    39.8 KB · Views: 199
  • Dish 2.webp
    Dish 2.webp
    50.3 KB · Views: 190
  • Dish 3.webp
    Dish 3.webp
    21.9 KB · Views: 231
  • Dish 4.webp
    Dish 4.webp
    48.3 KB · Views: 231
  • Dish 5.webp
    Dish 5.webp
    62.5 KB · Views: 186
  • Dish 6.webp
    Dish 6.webp
    15.4 KB · Views: 190
  • Dish 7.webp
    Dish 7.webp
    83 KB · Views: 249
  • Dish 12.webp
    Dish 12.webp
    128.5 KB · Views: 177
  • Dish 11.webp
    Dish 11.webp
    127 KB · Views: 182
  • Dish 10.webp
    Dish 10.webp
    37.7 KB · Views: 192
  • Dish 9.webp
    Dish 9.webp
    126.5 KB · Views: 197
  • Dish 8.webp
    Dish 8.webp
    77 KB · Views: 239
Further photographs
 

Attachments

  • Dish 19.webp
    Dish 19.webp
    32.2 KB · Views: 112
  • Dish 18.webp
    Dish 18.webp
    19.2 KB · Views: 158
  • Dish 17.webp
    Dish 17.webp
    14.1 KB · Views: 168
  • Dish 16.webp
    Dish 16.webp
    32 KB · Views: 123
  • Dish 15.webp
    Dish 15.webp
    44.1 KB · Views: 127
  • Dish 14.webp
    Dish 14.webp
    80.6 KB · Views: 118
  • Dish 13.webp
    Dish 13.webp
    29.9 KB · Views: 126
Nice work, and some handy little gadgets for finding the satellite.
 
Yep. Great project, well executed.
 
Very good. Those CM stands are very versatile, mine's been used for various dishes over many years.
 
Thanks all, I've found 24.5w now, signal level on the Horizontal transponder is about 7% better and the Vertical transponder is 3% better than on the Gibertini 104cm

Comparison photos on the same receiver of the Channel Master 1m with an Inverto Quad C120 and Gibertini 104cm with Invacom Dual LNB.

Will add photos when I've added an extra LNB for 30w
 

Attachments

  • Dish 20.webp
    Dish 20.webp
    23.9 KB · Views: 107
  • Gibby 2.webp
    Gibby 2.webp
    18.6 KB · Views: 114
  • Gibby.webp
    Gibby.webp
    16.8 KB · Views: 126
  • Dish 21.webp
    Dish 21.webp
    22.1 KB · Views: 99
Nice rendering of the project progression.

I have a CM 180 cm that has some wear in one part of the edge.
I was actually just going to paint it, but now I am thinking perhaps covering the exposed metal mesh first (very little, but nevertheless).

Also thanks for confirming the painting work - do let us know how it sticks.
I've had heated debates with paint-store sales people as well as painters about what to use.
Many say that nothing will stick properly, so I'll be happy to hear them proved wrong! (Fair to say that the experts on this forim, of course, pointed me to the auto-paint immediately!)
 
All cabled up and 30w lnb added. Used a locking butter box till another water proof diseqc switch arrives off eBay.
 

Attachments

  • Dish 1.webp
    Dish 1.webp
    268 KB · Views: 177
  • Dish 2.webp
    Dish 2.webp
    246.9 KB · Views: 137
  • Dish 3.webp
    Dish 3.webp
    316.6 KB · Views: 157
  • Dish 4.webp
    Dish 4.webp
    170.7 KB · Views: 126
That's come along nicely.

Can't tell it isn't brand new.

Great job.
 
I just got myself the same 1m channel master dish, tooway aswell.
It was only a year old hardly a mark on it, feedhorn and mount attached, all for 50 euro, bargain.

I am also looking to get another one too for cheap.
 
Back
Top