channel master 2.4m help

[icecube]

i have tvro channel master 2.4m, comes with 3 feed legs 2 long ones and one short .
the long ones bolts directly to the antenna, but i don't know where to bolt the short one?
any help please
pictures if possible.
regards

 

[nelson_b]

i have tvro channel master 2.4m, comes with 3 feed legs 2 long ones and one short .
the long ones bolts directly to the antenna, but i don't know where to bolt the short one?
any help please
pictures if possible.
regards

hi - have a look at this webpage
-http://www.ascs.com.au/products/antennae_and_rf_equipment/skyware_global
there are some PDF datasheets at the right hand side of the page to download - they have pictures in them .

cheers.

 

[icecube]

Nelson_b , thanks
but the picture is not clear , can any member with CM or andrews take a picture for me?
thanks

 

[wod]

there should be a slot for the 3rd lnb arm to slot into.

My cm 1.2 the arms slot into the dish it's self rather than bolt to the sides.

 

[icecube]

wod,
no slot for the lower arm ,side ones bolts to the sides.
is it possible to drill a hole?

 

[Mickha]

Can you please upload some pictures, I'm sure we must have some CM 2.4M images in the members picture section:
http://www.satellites.co.uk/forums/442-pictures-of-members-setups-and-general-satellite-installations/