Advice Needed China Radio on 45W

Manikm909

Manikm909

Small'ish Dish Man
My Satellite Setup
Channel Master 1.8M on Edision MIO 4K & GTMEDIA Combo, and CM1.2M on Octagon SF8008
My Location
Kent, UK
hey guys, some of you may have seen the other thread re ARC at 53, but this matter of CR at 45w - was probably being missed due to the name of the thread, so thought id start a new one dedicated to it.

this isnt because i WANT chinese radio, more to do with the fact that i know my dish \ setup should get it, so it annoys me that i cant.

for those of you that can reach 45w - are you able to pull in china radio (Radio channels) - my ARC can go from 53e (12db) to 34.5w (20db) - i can also pick up weird BEAM type TPs on 53w and 63w - so I beleive my ARC to be good (it may not be) - however, 45w, seems to just totally elude me

another member on here, has the same, so im not alone - whats the trick...

any ideas...
 
I have no problem here in South Yorkshire getting 45 West until the leaves come onto the ash trees two gardens away in summer.Then I loose it until Autumn.China radio comes in at 11.7 dB
Today's scan.
TBS6983 100cm Dish
 

Attachments

  • 45w.webp
    45w.webp
    51.3 KB · Views: 12
thank you!

that is very interesting indeed....its interesting because I can lock onto one of those TPs at 10.8 db - its the 11548.760 - V - 34281

although my receiver shows 11550 - V - 34286

however, nothing for 11604 - H - 989

very very odd!
 
@manikm909

Have you tried several different receivers on the China Radio transponder to see if one specific receiver tuner type can lock it?

Also, are you blind scanning for the frequency or manually inputting the parameters?
Some receivers may have an issue with missing low SR frequencies on a blind scan but readily locking them on a manual parameter input scan.
 
Lazarus said:
Can your receiver actually cope with sub 1k Symbol Rate?
Click to expand...
yes, Octagon SX88 4K and Edision MIO 4K plus - both capable.

i will try a manual add later on but i have been blindscanning up until now...
 
manikm909 said:
yes, Octagon SX88 4K and Edision MIO 4K plus - both capable.

i will try a manual add later on but i have been blindscanning up until now...
Click to expand...

With your Edision OS mio 4k+ if you do a transponder scan then stop it before it proceeds on to the channel scan, is China Radio listed as a found transponder.
Sometimes with those mio's I have noticed that they scan in a transponder but subsequently fail to lock it on a channel scan.

If you have access to an older receiver such as a Dr HD F15 or a TM-5402 it would be interesting to see if they would lock it?
 
moonbase said:
With your Edision OS mio 4k+ if you do a transponder scan then stop it before it proceeds on to the channel scan, is China Radio listed as a found transponder.
Sometimes with those mio's I have noticed that they scan in a transponder but subsequently fail to lock it on a channel scan.

If you have access to an older receiver such as a Dr HD F15 or a TM-5402 it would be interesting to see if they would lock it?
Click to expand...
i have an octagon sf8008 in the kitchen - i could grab that....im pretty sure the Octagon SX88 4K should lock it tho...
i'll test later when calm returns to the house
:)
 
i guess the good news is, this confirms my ARC is indeed ok!!
:)
 
Just played this game ..... 80cm dish in the rain in N.Yorks, with Edision Primo

China Radio SS 88 SQ 82
 
manikm909 said:
i have an octagon sf8008 in the kitchen - i could grab that....im pretty sure the Octagon SX88 4K should lock it tho...
i'll test later when calm returns to the house
:)
Click to expand...

Both the SF8008 and the mio are E2 recevers and rely on the E2 blind scan plugin and the E2 manual scan.
The logic for testing with a receiver such as a Dr HD F15, or TM-5402 is to try it with something that is completely non E2.
 
moonbase said:
Both the SF8008 and the mio are E2 recevers and rely on the E2 blind scan plugin and the E2 manual scan.
The logic for testing with a receiver such as a Dr HD F15, or TM-5402 is to try it with something that is completely non E2.
Click to expand...
appreciate that mate, but i dont have anything non E2, other than the SX88 4K
actually i do have the older sx88 in a box ready for ebay!!!! i'll try that - just remembered.
 
I've got an Edision OS mini 4K and cannot get this one either. I was able to find the data channel on 40.5w but nothing on 45w -
 
Chr0nik said:
I've got an Edision OS mini 4K and cannot get this one either. I was able to find the data channel on 40.5w but nothing on 45w -can u
Click to expand...
hey mate, can you lock the TP i mentioned above....
 
moonbase said:
Both the SF8008 and the mio are E2 recevers and rely on the E2 blind scan plugin and the E2 manual scan.
The logic for testing with a receiver such as a Dr HD F15, or TM-5402 is to try it with something that is completely non E2.
Click to expand...
My TM-5402 M3 used to get it with no/few problems
manikm909 said:
appreciate that mate, but i dont have anything non E2, other than the SX88 4K
actually i do have the older sx88 in a box ready for ebay!!!! i'll try that - just remembered.
Click to expand...
As did the SX88 yesterday:D
PS: looks like there are more than a few "hidden" differences between the older SX88 and the 4K version.
 
jeallen01 said:
My TM-5402 M3 used to get it with no/few problems

As did the SX88 yesterday:D
PS: looks like there are more than a few "hidden" differences between the older SX88 and the 4K version.
Click to expand...
if it pulls in china radio, i might keep the older sx88
 
As Lazarus' Edision Primo can do it then the SX88 can as well.
 
Isnt Edision Primo and sx88 the same box under the hood?
 
I had the SX88 + and used to get the China Radio no problem, then upgraded to the SX88 4K and no luck on them. Also I did mention this before in another post, but was not able to get the Joy FM, Metro FM radio etc on Turksat, to the point I even emailed Lyngsat, it was tested and the radio is coming in loud and clear according to Lyngsat. These receivers seem to struggle with them low symbol rates. Am I missing the China stations?, no but as Manikm909 mentioned it’s more so I should get them but can’t. If older receivers can pick these things up why can’t the new ones!?
 
Back
Top