ClarkeTech 5000C Flash Dump needed

E

erhano

Member
Messages
5
My Satellite Setup
ClarkeTech 5000C
My Location
Turkey
I urgently need Flash Dump file for ClarkeTech 5000C. My receiver is dead and flash must be reprogrammed. Tried to download the firmware with RS232 but didn't worked. No lights on front panel.
Does anyone have flash dump file or any idea where I can find it?
I will very much appreciate your help. Thanks
 
Topper

Topper

Amo Amas Amant Admin
Staff member
Messages
23,132
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
Welcome to the forum

I suggest you google for ClarkeTech 5000C and follow the links there. it would appear to be a satellite Combi unit presumably that is why it has a C suffix, it does though sound like you need a jtag to fix it
 
Robbo

Robbo

Retired Mod
Messages
6,424
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
When trying to reflash it using RS232, did you start the loader with the box off?.. then turn the box on.

If not, try it, it might bring it back to life
 
BombedOne

BombedOne

Regular Member
Messages
1,107
My Satellite Setup
Covering 30W-105.5E range, two motors, C and Ku band. Various receivers/cards/cams/etc.
My Location
Republic of Georgia
first, try to load boot_7109.stb via RS232, if successfull, then try the original firmware.

Regarding JTAG, as far as I know, there are no JTAG solutions available for STb7109, except evaluation kit from STmicroelectronics, which costs around $1500..
 
Top