conax file

L

LES BARROW

Non-Activated User
My Location
WARRINGTON
I NEED HELP I KNOW THAT CONAX HAS GONE OF ON TUESDAY BUT WHICH FILES DO I USE FOR THE TIT CARD IT IS GOING INTO A FORCE 500 SERIES WITH AN EMBEDED CAM PLEASE HELP:confused:
 
you need a .hex and .eep file, but they aren't out right now. you have to wait until next week...be patient and go rent some DVDs meanwhile ;-)

...oh, wiat, i just saw you are using an embedded cam. do tit cards work with embedded? or only with Matrix RL cams? i use MRL...
 
No, not yet Les, caps lock stuck? ;)
 
LOL, quieter. :) :-righton
 
Why not look at a different satellite ?, theres plenty up there
 
Les

Get your motor fixed - titanium file out now for your seca cam with italia, and D+ on astra 19E.
 
Hi thanks still waiting for my motor but I would like to ask a few questions 1 can I program my tit card to say watch the french programs on 19E or Inerto prorams?And 2 where do I get the latest mr files 3 how do I program my mr rev cam it is surpost to have been done all ready but the sat man said it had not and as it had been bought for me I would like to use it if at all possible.many thanks.ps its hard when you dont know what you are doing with programing ect:confused:
 
There are two types of files for the tit card.

One is a TMB type file and has more than one provider ( can have six ) and works best in a conax cam or EMB conax slot.

The other type of file is just straight conax and is ment just for 1W.


There is also a straight seca file for the Tit and is ment for 13E.

MREV files can be found at the DEN. Do some reading in the MREV section there.

I drive a Force and find that the Tit + Force will do almost everything that is hacked.
 
Les

What was wrong with the help I gave you before? This thread goes in to some detail about programming your matrix reloaded:
http://www.satellites.co.uk/php-bin/forum/showthread.php?t=25915

You concluded by saying your computer wasn't next to your receiver.

Also, you indicated that your cam returned UCAS3.0, and I assumed it was a matrix reloaded. If it is actually a matrix revolution (you use the term mr rev), then the files are different - they start with MR2.xx. Be careful because mr files are not compatible with mr rev.
 
HI I am back I have both cams mr +mrv but now I need the tit files for saca2 for aston yet again.There was nothing wrong with the information you gave me I was unsure what files to load or even where to get them rember I am new to this
 
hi sky italia gone off or I have the wrong files what is the new files for the tit card with the aston cam I allso need the file for the mr and the mr.v all tho I dont know how to load the new mr.v?I get my motor fixed to move to other sats I dont know what files to load? it is very hard when you dont know what you are doing.please help
 
Les,
What on earth are you doing with three different CAMs if you - quote - don't know what you're doing - unquote? Don't you think it would be an idea to concentrate on one CAM only until you get to grips with it? Then with that experience tucked away, you can bring out the second CAM and so forth.

There is a lot of knowledge and experience (and help available) on this and other forums. I think you really need to take a step back, concentrate on one task on one CAM at one time, sort it out and then move to the next task etc. You will find the "search" function very useful.

I appreciate that we all have to start somewhere but to admit, after 67 posts, that you don't know what you're doing must surely mean you're trying to do too much too quickly. Don't you agree?
 
Hi all I am back after a week without my sat so can anybody tell me the latest codes for sky italia with for saca2 tit fille with Aston cam and Conax tit card embeded cam please my motor is now repaired so I need to be up and running.
 
Nowt doing with Conax, and unlikely for quite a while yet. For Seca2 you would have to check through Nobblies list for the latest offerings
 
Back
Top