Conax

[BGonaSTICK]

Think there is also a patch out.

 

[Sab]

Yes .WLTDO files. Also TMB files too.

John
thanks for inf. Sab

 

[Tigerasss7]

Any ideas what Im doing wrong !

Ive tried the fix
Bat.file run on com 1 - Elvis light comes on for a few secs

Prog new file BUT still - NO GO ?

Half way through says - FW 90 error

HELP

Thanks

 

[Mickha]

Hi Tigerasss7,
have you tried programming your card with an older file first:
_http://javachat.dk/29-6m2.zip
then run the new file. This worked for me before the fix came out.
Merry Christmas
Mickha

 

[john_graydon]

John
thanks for inf. Sab

Remember to update when the new one comes out, for 1w.

 

[Dasdl]

*Tigerasss7

I think I have found the problem, I cannot program the MII card in highspeed mode using elvis.

For those people who have similar problems i.e. get "No response received from card" when running m2xmasfixCOM1.bat then just edit the batch file as follows:

m2fix -p1

Please note the -p1 = COM1, -p2 = COM2, -p3 = COM3, and -p4 = COM4

Hope this helps

Merry Christmas

Dasdl.

 

[Tigerasss7]

Thanks for the help everyone

BUT still NO GO

Am now sure the problem, is that I cannot program the MII card in highspeed mode using elvis as last post.

BUT editing the m2xmasfixCOM1.bat batch file as follows -

m2fix -p1 does not slow down the file ? so impossible to program with elvis tried
m2fix -p1 -slowspeed Still the same : (

Anyone have a link to old MII files ones that you see a box to update OS as well as programme.

Thankyou

Tigerasss7

 

[Tigerasss7]

:chc :chc :chc :chc :chc

ALL WORKING NOW - Elvis Progger needed
to put in Phoenix Mode NOT Smartmouse

We live & learn

Thanks ALL - GREAT SITE

Tigerasssssssssssssssssss7 :chthumb :chthumb :chthumb

 

[haggard]

:chc :chc :chc :chc :chc

ALL WORKING NOW - Elvis Progger needed
to put in Phoenix Mode NOT Smartmouse

We live & learn

Thanks ALL - GREAT SITE

Tigerasssssssssssssssssss7 :chthumb :chthumb :chthumb

Well admitted Tiger!!
Phoenix mode is the instruction in the first line of how to . . . .
I too have overlooked that once or twice since I need to run multiprog to set phoenix and then the exec to progr.

 

[Milkybarkid]

I have Infinity Phoenix. I put it in Phoenix 3.58 Mhz, enable, and when I go into the M11 file the speed is set to normal, I then prog the M11 card.


All fine except for a few of the Kiosk channels. :chc

 

[Mickha]

Hi Milkybarkid,
all the Kiosk channels are working with my MII and Conax 4 cam, which ones arer you experiencing problems with?

 

[Milkybarkid]

Kiosk 2,4,6,7,8.

I'm using an M11 and a Dragon.

 

[Mickha]

I think I've read of problems concerning the Dragon Cam before, have you tried any other software versions in the Cam? All kiosks are open, using the MII card, hopefully some member who has a Dragon Cam and MII card has the answer.

Merry Christmas
Mickha

 

[Razor]

Most likey A pid problem, Did you try deleting them , and rescan.

 

[Milkybarkid]

I searched on a couple of other sat forums and some people have had probs with Kiosks using Dragon and M11.

 

[Lofberg]

this will be slightly off topic, but... I've been out of the sat scene for a while now, own dishes not being allowed at university halls of residence anyway, I got my M-II programmed perfectly, but after a while picture just freezes and doesnt resume until I re-insert the card, CAM or reboot my Mediamaster 9602. Is this a problem with the new OS for M-II? Or do you reckon either my CAM/receiver/card is shafted?
Oh and merry xmas to everyone!

 

[Mickha]

Hi Lofberg,
I usually experience a brief interuption using the MII card, that I don't experience with my Titanium card, but not to the amount you report, can you please post your Cam and receiver details.
Merry Christmas
Mickha

 

[Lofberg]

Hey. I've got my old Nokia MediaMaster 9602S and Conax CAM 3.01. The error seems to have fixed now when i cleaned the card and connectors inside the receiver common interface slot... I just wanted to make sure it wasnt a problem with the software... Thanks a lot though!

 

[nawa]

hello everyone
I have infinity usb phoenix, titanium card and conaxembedded.
can you please help me to program WhoLetTheDogOut file on the card.

thank you

 

[jagan]

any one have prne craker key?