dishdx
Member
- Joined
- Oct 7, 2017
- Messages
- 119
- Reaction score
- 34
- Points
- 28
- Age
- 43
- Website
- www.dxing.cz
- My Satellite Setup
-
Showbox Vitamin, Octagon SX88
Dishes: Offset motorised 120 cm 40W-75E IBU Twin, Channel Master 180 78.5E-30W manual rotate , Cahors BigBisat 8 x Alps 1W,5E,9E,13E,19E,23.5E,28.2E,39E. Planty of equipments for FM and AM DX. http://www.dxing.cz
- My Location
- Central Bohemia
Hello!
1) What should be right position of conical scalar on Titanium C2W PLL LNB? I placed it on maximum of signal aprox. on number "42". I saw how measure F/D ratio for prime focus, but for my Offset Channel Master 180 i don´t know:-( Can you help me please?
2) And second question. I tested the position of C band LNB in LNB holder, and best results are when LNB is quite more back than Ku... (nearer to the top of LNB arm) But attached picture says that position is more to front (nearer to dish)... ?
3)
Why is skew not significant on C band like on Ku? Im on Thaicom 78.5 and the skew should be 36%... but i have 0% with best results...
Thank you!
1) What should be right position of conical scalar on Titanium C2W PLL LNB? I placed it on maximum of signal aprox. on number "42". I saw how measure F/D ratio for prime focus, but for my Offset Channel Master 180 i don´t know:-( Can you help me please?
2) And second question. I tested the position of C band LNB in LNB holder, and best results are when LNB is quite more back than Ku... (nearer to the top of LNB arm) But attached picture says that position is more to front (nearer to dish)... ?
3)
Why is skew not significant on C band like on Ku? Im on Thaicom 78.5 and the skew should be 36%... but i have 0% with best results...
Thank you!