connecting to cccam server - problem

S

Symbiot

Member
Messages
8
My Satellite Setup
DB dm600
mgcamd
Experience: Nooblike Novice
My Location
Denmark
Hi all

I am testing a share environment with:

1 dreambox dm600 acting as server
1 azbox HD premium as client.

I have everything running but...

The azbox connects to the db. I look at cccam server info on db, and see the azbox connecting..

It then (after counting up to 20 seconds) disappears from the active client list, and is now only shown under 'clients'.

This is a problem.. and I simply don't know how to fix it..

I truly hope someone out there know what I can do!
 
B

Burnham Beech

Specialist Contributor
Messages
1,022
What CCCam in the AZBox ?

What does it say in your web browser for the DM600/AZBox -http://192.168.1.nnn:16001/ command.
 
compufunk

compufunk

Regular Member
Messages
1,658
My Satellite Setup
DM 600-S, VU+ Duo,
Moteck SG2100, Fracarro Penta 85 dish, LG LH3000 42" TV + some computers
My Location
NW, Ireland
Your AZbox is obviously not requesting any ECMs from the DM600 server.

When a peer first connects to a server, it will briefly appear as an active client, then move to the list of connected inactive clients until it requests ECMs from the server.

Have you tuned the AZbox to an encrypted channel to test it out?
 
S

Symbiot

Member
Messages
8
My Satellite Setup
DB dm600
mgcamd
Experience: Nooblike Novice
My Location
Denmark
hi

yes, that's exactly what's happening

I've tuned into encrypted channels yes...

They just come out.. scrambled..

the ecm thing is 0
 
compufunk

compufunk

Regular Member
Messages
1,658
My Satellite Setup
DM 600-S, VU+ Duo,
Moteck SG2100, Fracarro Penta 85 dish, LG LH3000 42" TV + some computers
My Location
NW, Ireland
Sorry, I cant help you any further because I dont have an AZBox. I believe DigDeep uses CCcam on his AZBox, he may be able to help you.
 
S

Symbiot

Member
Messages
8
My Satellite Setup
DB dm600
mgcamd
Experience: Nooblike Novice
My Location
Denmark
Here's the info I can give you:

Right guys.

Here's my info. This is local testing only, so I hope posting lan IP is ok.

This is AzBox Cline
C: 192.168.1.37 12000 simpson simpson

This is Dbox Fline:
F: simpson simpson 10


These are screenshots from dbox :16001 info

_http://img183.imageshack.us/img183/5526/activeclients.jpg

then after the 20 seconds..

_http://img183.imageshack.us/img183/2438/connectedclients.jpg


someone noted this:


My Azbox stays connected to the DB but still all channels are scrambled.

On azbox I have installed the Emu/ files:

Emu/lib
Emu/openxcas/dvbapi

from the file Emu.rar floating about on forums..

Settings in the 2 files in openxcas are:
module.seq just has:

dvbapiCAS


i've had another file that listed more..

openxcas.conf looks like:
Code:
[modules]
count = 4
active_auto = true
active_1 = gCamd
active_2 = incubusCamd
active_3 = MultiCAS
active_4 = dvbapiCAS

[module_1]
name = gCam
path = EMU/OpenXCAS/gCam
daemon = gCam
version = 0.1

[module_2]
name = incubusCamd
path = EMU/OpenXCAS/incubusCamd
daemon = incubusCamd.sh
version = 0.55

[module_3]
name = MultiCAS
path = EMU/OpenXCAS/MultiCAS
daemon = emu_module
version = 0.98

[module_4]
name = dvbapiCAS
path = EMU/OpenXCAS/dvbapiCAS
daemon = emu_module
version = 0.1

I changed the count=3 to four since there are 4 modules..


Now I've had it working once.. a few days ago.. but what I did back then.. I have NO idea...


What else.. hm..
Azbox running on both static & dynamic.. no difference.. Wlan and Lan no difference..

Can it be something to do with ports? I've tried different approaches.. but can't seem to hit the right solution..

Appreciate any and all help!
 
S

Symbiot

Member
Messages
8
My Satellite Setup
DB dm600
mgcamd
Experience: Nooblike Novice
My Location
Denmark
oh, I missed mentioning.. it's CCcam 2.1.1
 
B

Burnham Beech

Specialist Contributor
Messages
1,022
Why F: simpson simpson 10 ? Try F: simpson simpson 2 0 0 { 0:0:2 }

Thanks for posting the webinfo for the DM - please post the webinfo for the AZBox (as I asked in my first reply).
 
dig deep

dig deep

Prince of Birthdays
Staff member
Messages
7,727
My Satellite Setup
Dream7020 and AZ Elite and a few DM800
My Location
Sweden
Well, the AZ and CCC are still (both) in beta so it is not working perfectly.

I have to reboot the box at least once a day but I use an old FW waiting for the next official. You can , of course try one of the lastest FW.

No port problems as this is inside Your lan.

Change the F line, update FW and be prepared for a boot every now and then.

I have the same setup, a DM 500 as server and AZ as client and I must say that it is working good for beeing a beta box. New FW is expected any day now.
 
S

Symbiot

Member
Messages
8
My Satellite Setup
DB dm600
mgcamd
Experience: Nooblike Novice
My Location
Denmark
Burnham Beech said:
Why F: simpson simpson 10 ? Try F: simpson simpson 2 0 0 { 0:0:2 }

Thanks for posting the webinfo for the DM - please post the webinfo for the AZBox (as I asked in my first reply).

Hi BB.

Here's a screen from the azbox.. it's the only one of the cccam info pages with actual info.

I don't understand why it says 'cards' 0 ...does that have anything to do with whether or not I can actually view anything..?
 

Attachments

S

Symbiot

Member
Messages
8
My Satellite Setup
DB dm600
mgcamd
Experience: Nooblike Novice
My Location
Denmark
dig deep said:
Well, the AZ and CCC are still (both) in beta so it is not working perfectly.

I have to reboot the box at least once a day but I use an old FW waiting for the next official. You can , of course try one of the lastest FW.

No port problems as this is inside Your lan.

Change the F line, update FW and be prepared for a boot every now and then.

I have the same setup, a DM 500 as server and AZ as client and I must say that it is working good for beeing a beta box. New FW is expected any day now.
Hi.

Thanks for the tip. Kind of annoying to have to reboot just to keep it running. I am using the xx81 FW.

I've tried changing the F line to the suggested.

I used 10 since the guy helping me said that would exclude any reshare problems... because it gives full access to any and all shares..
 
B

Burnham Beech

Specialist Contributor
Messages
1,022
Thanks for posting the webinfo. Cards=0 means your AZBox can't see any cards in your DM600 or the DM600's clients. Do you have a local card in the DM600.

Try this.

1/ Change the Fline to F: simpson simpson 3 0 0 { 0:0:2 } - the 3 gives you one more hop.
2/ Hard reboot both the DM600 and AZbox (remove power from both and restart)
3/ Then see what happens.
 
Top