• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

connecting

A

argoran

Guest
#1
well hi everybody
i own an analogue palcom receiver that can work with a magnetic polarizer
- chaparral dual feedhorn
- wideband lnb and a c-band lnb
well i want to add digital nokia 9800 s to my existing components is there is any good way to be able to use both analogue and digital receivers without much trouble and how to connect them together
and is there any universal lnb that works in both c and ku bands
thanks
 

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#2
Chaparral do the CorotorII+ - a combined c-& ku-band LNBF, but it has a motorised polarisor - ie is not a "universal" type.

They also do a similar all-in-1 "bullseye" model with simultaneous h/v polarity reception (but again, therefore, not a "universal" type)


See:
http://www.chaparral.net/microwave_products.html

2old
 

pajo100

Regular Member
Messages
121
Likes
0
My Satellite Setup
1.2 /1.8 Channel Master fully 36v motorised 58west to 42east Pace MSS500 Positioner
,Technomate 6900 Super HD ,Humax 8100PVR oh and a Amstrad Sky+ digibox.
My Location
Ireland
#3
If you are using a quadband lnb you can use it with a spsi priority switch you will probably have to change the polarity when searching but it works on most multi band lnb setups if a bit fiddly and you can combine your analogue and digital receivers with this set up until such time as you get a universal lnb.