Coship cdvb-2300a and 5300a patch

[titinet]

i didn't think so but i have a few channels of can**sat who works

 

[steffan_st]

You are watching them in via**ess,that's why they are clear.

i didn't think so but i have a few channels of can**sat who works

 

[titinet]

File won't work in the old Coship,it's too big just like the pack "Boston Coship nouvelle version" By the way titinet,does the Truman 9000 emu do se*a 2?

you are right,on "DVB UPLOAD V1.4 site" they says that is a wrong file(fichier bidon)
encore un peu de patience...

 

[steffan_st]

I have been looking at the new emu's in hex and they look totaly different compared to the old ones.I'm almost sure the new receivers has another chip
so it will never be possible to use this emu's in the old receivers.And that's probably the reason the file is bigger.

 

[titinet]

there is a another new file "str3680" on the slovak upload center

 

[steffan_st]

It's a file that would work with the old Coship 2300 I guess(same size and looks similar to the Truman),have had a couple of beers tonight so I can examine it a bit deeper later.Have you read some info about what it can do?

there is a another new file "str3680" on the slovak upload center

 

[titinet]

It's a file that would work with the old Coship 2300 I guess(same size and looks similar to the Truman),have had a couple of beers tonight so I can examine it a bit deeper later.Have you read some info about what it can do?

it's the old "srt3680t*s ok" with k** auto update
i try it and it work with the old coship,but no s**2

 

[steffan_st]

it's the old "srt3680t*s ok" with k** auto update
i try it and it work with the old coship,but no s**2

Well the autoupdate has never worked for me,by the way do you have more p*y channels now compared to the Truman emu or is it the same?
Is the Truman firmware autoupdating?

Cheers

 

[steffan_st]

it's the old "srt3680t*s ok" with k** auto update
i try it and it work with the old coship,but no s**2

I have to agree with you that it's the t*s ok bin because you have installed and tested it but when I check it in hex it looks very different to the t*s bin.........

 

[titinet]

Well the autoupdate has never worked for me,by the way do you have more p*y channels now compared to the Truman emu or is it the same?
Is the Truman firmware autoupdating?

no more channels** but the "truman9000" work better and faster than the srt3680
ps:wish software do yo use to compare the "bin file"?

 

[steffan_st]

I use Hex Cmp 2.Very good!

 

[titinet]

thank 's for the information,but where did you find it?

 

[steffan_st]

thank 's for the information,but where did you find it?

Can't remember but if you pm me and give me your mail adress I can send it to you.

 

[titinet]

i find an another soft :"asm-dsm"
did you know it?
i try it but it's not easy to compare differents "bin file" because i don't understand what's the signification of the "subroutines"

 

[steffan_st]

i find an another soft :"asm-dsm"
did you know it?
i try it but it's not easy to compare differents "bin file" because i don't understand what's the signification of the "subroutines"

never seen that software.

 

[steffan_st]

Hey titnet! How do you save the k*ys as a bin file in the upgrade tool?

 

[titinet]

i find it at the al7bar.ca
they says that you can edit and modify the bin file but i don't understand how does it work

 

[titinet]

hi stephan,
you must save it in a folder with the "bin" extension,than you re-open it with the upgrade k** (don't remember to put your setup "com"before you upload the k**)

 

[steffan_st]

i find it at the al7bar.ca
they says that you can edit and modify the bin file but i don't understand how does it work

please post it here so i can have a look!

 

[titinet]

sorry i don't know how to post a file on the forum
can you help me or can you give me an email adresse than i send it to you