d 500s wont install cams ?

georgefromasda

expert ..... in nothing
Messages
108
Likes
0
My Satellite Setup
dreambox 500s
art card
My Location
liverpool uk
#1
hi
just put my d 500s back in the living room , deleted all the old cams just downloaded ccam from the blue button and nothing , its stayed at 68% , also installed mgcamd and its says its doing it but it still stays at 68%

i dont know where to ftp them too but i can use my laptop to communicate with the d500 no problem
any ideas
 

sonic1

Specialist Contributor
Messages
834
Likes
104
My Satellite Setup
Vu + Ultimo 4K - Solo 4K - Uno 4K - Duo2- SoloSE - Zero- Uno -Prismcube Open Black Hole - 0.6 , 98cm Funkee , 28E-23.5E-19E-13E
My Location
Black Hole Team
#2
Where to put files in EMUs:

Camx:
Keys Directory: /var/keys/ - Softcam.Key Autoroll.Key
Prgram file : /var/bin/
Config Files : /var/etc/
AU Files : /var/keys/Autoroll.Key
________________________________________

GBox:
Keys Directory: /var/keys - seca,nagra,via,irdeto,conax
Prgram files: /var/bin - gbox
Config Files: /var/keys - gbox_cfg
AU Files: /var/keys/roms/
________________________________________

Camd3:
Keys Directory: /var/keys - camd3.keys
Prgram files: /var/bin - camd3
Config Files: /var/keys - camd3.conf - camd3.config
AU Files: /var/keys/ - seca_hash.bin - seca2_hash_0070.bin
seca2_mask_0070.bin - camd3.keys
________________________________________

Evocamd:
Keys Directory: /var/keys - Autoupdate.Key & Keylist.txt
Prgram files: /var/bin - evocamd
Config Files: /var/keys - camd_cfg
AU Files: /var/keys - Autoupdate.Key - /var/scce/
________________________________________

Newcamd:
keys directory: /var/scce -keylist, ppua, rsakeylist & tpscrypt of
/var/tuxbox/scce (newcamd 6.01, kan oude dir gebruiken)
Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
Config files: /var/tuxbox/config - newcamd.conf, cardserv.cfg, betad.cfg
AU files: /var/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin,
sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin,
nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin,
nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist
________________________________________

Mgcamd:
keys directory: /var/keys - SoftCam.key & AutoRoll.key
Program files: /var/bin - mgcamd
Config files: /var/keys - mg_cfg
AU files:
________________________________________

Scam:
Keys Directory: /var/keys - seca2,nagra,via, - irdeto,conax
Prgram files: /var/bin - scam
Config Files: /var/keys - softcam.cfg
AU Files: var/keys/ - seca2 - /nagra_rom
________________________________________

Radegast :
keys directory: /var/keys - SoftCam.key & AutoRoll.key
Program files: /var/bin - rdgd, camd.rdgd, netpilot
Config files: /var/etc - radegast.cfg
AU files: Need a patched driver for older conax cards
 

sonic1

Specialist Contributor
Messages
834
Likes
104
My Satellite Setup
Vu + Ultimo 4K - Solo 4K - Uno 4K - Duo2- SoloSE - Zero- Uno -Prismcube Open Black Hole - 0.6 , 98cm Funkee , 28E-23.5E-19E-13E
My Location
Black Hole Team
#3
Don't forget to Chmod 755 bin files and edit emu config.
Not sure what image you are using so I can not be more specific.
 
Top