d 500s wont install cams ?

georgefromasda

expert ..... in nothing
Joined
Jan 28, 2006
Messages
108
Reaction score
0
Points
0
Age
53
My Satellite Setup
dreambox 500s
art card
My Location
liverpool uk
hi
just put my d 500s back in the living room , deleted all the old cams just downloaded ccam from the blue button and nothing , its stayed at 68% , also installed mgcamd and its says its doing it but it still stays at 68%

i dont know where to ftp them too but i can use my laptop to communicate with the d500 no problem
any ideas
 

sonic1

Specialist Contributor
Joined
Aug 6, 2004
Messages
870
Reaction score
114
Points
43
Age
49
My Satellite Setup
Vu + Ultimo 4K - Solo 4K - Uno 4K - Duo2- SoloSE - Zero- Uno -Prismcube Open Black Hole - 0.6 , 98cm Funkee , 28E-23.5E-19E-13E
My Location
Black Hole Team
Where to put files in EMUs:

Camx:
Keys Directory: /var/keys/ - Softcam.Key Autoroll.Key
Prgram file : /var/bin/
Config Files : /var/etc/
AU Files : /var/keys/Autoroll.Key
________________________________________

GBox:
Keys Directory: /var/keys - seca,nagra,via,irdeto,conax
Prgram files: /var/bin - gbox
Config Files: /var/keys - gbox_cfg
AU Files: /var/keys/roms/
________________________________________

Camd3:
Keys Directory: /var/keys - camd3.keys
Prgram files: /var/bin - camd3
Config Files: /var/keys - camd3.conf - camd3.config
AU Files: /var/keys/ - seca_hash.bin - seca2_hash_0070.bin
seca2_mask_0070.bin - camd3.keys
________________________________________

Evocamd:
Keys Directory: /var/keys - Autoupdate.Key & Keylist.txt
Prgram files: /var/bin - evocamd
Config Files: /var/keys - camd_cfg
AU Files: /var/keys - Autoupdate.Key - /var/scce/
________________________________________

Newcamd:
keys directory: /var/scce -keylist, ppua, rsakeylist & tpscrypt of
/var/tuxbox/scce (newcamd 6.01, kan oude dir gebruiken)
Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
Config files: /var/tuxbox/config - newcamd.conf, cardserv.cfg, betad.cfg
AU files: /var/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin,
sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin,
nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin,
nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist
________________________________________

Mgcamd:
keys directory: /var/keys - SoftCam.key & AutoRoll.key
Program files: /var/bin - mgcamd
Config files: /var/keys - mg_cfg
AU files:
________________________________________

Scam:
Keys Directory: /var/keys - seca2,nagra,via, - irdeto,conax
Prgram files: /var/bin - scam
Config Files: /var/keys - softcam.cfg
AU Files: var/keys/ - seca2 - /nagra_rom
________________________________________

Radegast :
keys directory: /var/keys - SoftCam.key & AutoRoll.key
Program files: /var/bin - rdgd, camd.rdgd, netpilot
Config files: /var/etc - radegast.cfg
AU files: Need a patched driver for older conax cards
 

sonic1

Specialist Contributor
Joined
Aug 6, 2004
Messages
870
Reaction score
114
Points
43
Age
49
My Satellite Setup
Vu + Ultimo 4K - Solo 4K - Uno 4K - Duo2- SoloSE - Zero- Uno -Prismcube Open Black Hole - 0.6 , 98cm Funkee , 28E-23.5E-19E-13E
My Location
Black Hole Team
Don't forget to Chmod 755 bin files and edit emu config.
Not sure what image you are using so I can not be more specific.
 

georgefromasda

expert ..... in nothing
Joined
Jan 28, 2006
Messages
108
Reaction score
0
Points
0
Age
53
My Satellite Setup
dreambox 500s
art card
My Location
liverpool uk
Top