A
Anonymous_1
Guest
Few screenshots and my experience with this card.
Last edited by a moderator:
A
Anonymous_1
Guest
Only one parameter available: enter the FI value to lock (or not) a signal
the most interesting software is StreamXpert, but also delivered with StreamXpress (streamXpert light) , DTGrabber+ (record a stream (from the card or over your network and share it over your network ) , and DTV (watching TV). This card is a pack DTA2737 CSCP, the software are included. (hardware key to add a new software).
More screenshots..
]
the most interesting software is StreamXpert, but also delivered with StreamXpress (streamXpert light) , DTGrabber+ (record a stream (from the card or over your network and share it over your network ) , and DTV (watching TV). This card is a pack DTA2737 CSCP, the software are included. (hardware key to add a new software).
More screenshots..
]
satesco
Specialist Contributor
- My Satellite Setup
- seven antennas,one toroidal with 16 lnbs,
6 satellite receivers,2 Meters,9 PC cards(tbs6983,6903,6590,6504,6522,6209,2603,6909X,6903X,6902se,skystar hd2),2 tuners usb-tbs5927 & tbs5925,Skystar HD.
Satellite reception between 100.5E-50.0W
- My Location
- Romania
Hi Feedsat,
What do you think of DekTec tuner?How it behaves at weak signal?
Thanks
What do you think of DekTec tuner?How it behaves at weak signal?
Thanks
A
Anonymous_1
Guest
Not good for weak signal or for low SR, this card is professional and mostly used for the "metrology" (check and control stream parameters).
A
Anonymous_1
Guest
Back to this post and this card, Dektec has updated the interfaces of StreamXpress and StreamXpert.
Also, now HEVC is now decoded
and no problem for NASA UHD @ 60fp/s:
Also, now HEVC is now decoded
and no problem for NASA UHD @ 60fp/s:
midwestmac
Regular Member
- My Satellite Setup
- 6ft solid aluminum prime focus
invacom lnbf,Tbs6925,prof 7301, azboxultra
- My Location
- Kansas border
Hey feedsat,
I saw your posts and pics of this card a while back.
I have this card now I was wondering can you lock a ACM continuous stream very well?
I saw your posts and pics of this card a while back.
I have this card now I was wondering can you lock a ACM continuous stream very well?
midwestmac
Regular Member
- My Satellite Setup
- 6ft solid aluminum prime focus
invacom lnbf,Tbs6925,prof 7301, azboxultra
- My Location
- Kansas border
Feedsat,
The reason I ask I was trying to use the ASI out to an ASI RX card
Just playing around with it I can't figure out what type of signal that Mark with the L3 frames would be good for.
Becuse supposedly I should be able to loop to TS out using the ASI
Thanks
The reason I ask I was trying to use the ASI out to an ASI RX card
Just playing around with it I can't figure out what type of signal that Mark with the L3 frames would be good for.
Becuse supposedly I should be able to loop to TS out using the ASI
Thanks
A
Anonymous_1
Guest
Hi,
Unfortunately not yet.
We are able to Decrypt the L3 Frames and also BBFrames but no way to decapsulate the GSE Frames.
If you find a solution let le know.
According to Dektec themselves, this is not possible...
Hi Feedsat,
I have a plan to buy this card, but idk some problems, can u get me some advices?
1. Can this card lock well with the ACM signals (TS/GS)?
2. Can this card lock well with the MIS signals (TS/GS)?, one chanel (in 16-32APSK) can record all of MIS ?
Thx first!
I have a plan to buy this card, but idk some problems, can u get me some advices?
1. Can this card lock well with the ACM signals (TS/GS)?
2. Can this card lock well with the MIS signals (TS/GS)?, one chanel (in 16-32APSK) can record all of MIS ?
Thx first!