DiseqC settings

B

bilti

Member
My Satellite Setup
19E+13E+16E
My Location
RO
Hi,

I need help for diseqc settings for echosmart 771 with the following configuration:
A single dish with a 6 degree monoblock
A single dish with 3 LNB
the three are united in a diseqc switch 4/1 and then go to a Sur 211f Spaun Switch to position 2,
on Spaun position 1 is the monoblock.
Spaun Uncomitted the switch is set to 1
I managed to see the satellites of the monoblock and one position of the switch 4/1 but the rest break,
I made a lot of combinations of settings but nothing.
The receiver settings are:
Comitted 1-4
Uncomitted 1-16
Repeat 1-2

Please help me with some advice

 
Adjust the rotary switch on the Spaun to "uncommitted switch 1".

To address the monoblock you do "uncommitted 1", "committed 1 and 2".

To address the LNBs on the other dish you do "uncommitted 2", "committed 1, 2, and 3".

You shouldn't need repeats, but if your receiver sends committed before uncommitted you will need one repeat.
 
Back
Top