euro.sat
Regular Member
- Joined
- Sep 22, 2015
- Messages
- 30
- Reaction score
- 60
- Points
- 18
- My Satellite Setup
- Skybox F3 with 1.1m motorised dish, Openbox S10 with 80cm motorised dish, and Openbox S9 with 60cm motorised dish. Azbox Premium for 4:2:2 feeds, and DVB-S2 USB reciever.
- My Location
- Cheshire
Hi all! New poster here, but I've been reading the forums on and off for a while...
I recently had my Triax TD110 professionally fine tuned to make sure that I was tracking the arc correctly (my efforts before hand were a little off, so I was misisng some weaker stuff like 4W and the far E/W satellites) The limit on the motor has been removed, but unfortunately the software restricts me from moving the dish past 56.9E with USALS. I know I'm able to get a lot further round with DiSEqc1.2, but as I manually need to add in the frequencies to know where I'm moving to with the 'Move East/West' commands on the motor/box, I could do with a list of transponders that I'm likely to be able to get.
Through trial and error, I managed to lock onto 62E last night, and a blind scan found 11.191H, 11.555H and 11.596H, plus I found an unknown signal from somewhere at 11.672V 14260. That one was weird, as it seemed to jump back and to from no signal at all, to about 70%??
So, if anyone has a list of strong active TP's on 68.5E, 66E, 64.2E, 62E, 60E and 57E (plus any I've missed), that would be great!
Also - when using the move E/W commands on the boc, does anyone know how far it actually moves the dish with each press? Is it something as simple as 0.1 of a degree etc?
I'll try and get some photos of my setup on here for those that might be interested!
I recently had my Triax TD110 professionally fine tuned to make sure that I was tracking the arc correctly (my efforts before hand were a little off, so I was misisng some weaker stuff like 4W and the far E/W satellites) The limit on the motor has been removed, but unfortunately the software restricts me from moving the dish past 56.9E with USALS. I know I'm able to get a lot further round with DiSEqc1.2, but as I manually need to add in the frequencies to know where I'm moving to with the 'Move East/West' commands on the motor/box, I could do with a list of transponders that I'm likely to be able to get.
Through trial and error, I managed to lock onto 62E last night, and a blind scan found 11.191H, 11.555H and 11.596H, plus I found an unknown signal from somewhere at 11.672V 14260. That one was weird, as it seemed to jump back and to from no signal at all, to about 70%??
So, if anyone has a list of strong active TP's on 68.5E, 66E, 64.2E, 62E, 60E and 57E (plus any I've missed), that would be great!
Also - when using the move E/W commands on the boc, does anyone know how far it actually moves the dish with each press? Is it something as simple as 0.1 of a degree etc?
I'll try and get some photos of my setup on here for those that might be interested!