diy installation of sky hd box

D

drbrimble

Member
My Satellite Setup
sky + laptop
My Location
Bristol UK
Hi I have just bought a pace sky hd box on ebay I am already a sky + customer on the front of the there is a sticker that says note to the installation engineer! it is imperative that the over air software download is performed before call back what does this mean I have to do and what else will I have to do to get the box up and running ? Thanks Darren
 
Welcome,

To perform an over the air software update follow the procedure below:

>Unplug receiver from mains
>Press and hold back up button on front of receiver and plug power back in
>Hold back up button until all lights remain on (approx 20 sec), then let go
>Leave until this has finished
>Wait a further minute for re-boot and then bring box out of standby

You will need to call sky to pair the card to the new box. For subs Hd content, you'll need an Hd package subscription.
 
satelliteman said:
welcome,

to perform an over the air software update follow the procedure below:

>unplug receiver from mains
>press and hold back up button on front of receiver and plug power back in
>hold back up button until all lights remain on (approx 20 sec), then let go
>leave until this has finished
>wait a further minute for re-boot and then bring box out of standby

you will need to call sky to pair the card to the new box. For subs hd content, you'll need an hd package subscription.
Click to expand...

but before you do all of this make sure that you have connected your receiver to the sky dish first
 
Back
Top