micron123
Member
- Joined
- Feb 3, 2008
- Messages
- 18
- Reaction score
- 0
- Points
- 0
- Age
- 58
- My Satellite Setup
-
DM7025
85cm dish
STAB motor
- My Location
- midlands, england
I had a problem with my box where the video signal kept dropping out.
I re-flashed it with LT4 via the network and all seemed fine for about a
day then it went off completely.
Now I can re-flash via the network or the serial port. It programs up OK.
But now when I power up the box does not boot at all.
The display sticks here :-
dhcp...
/flash/bootlogo.elf
Any ideas out there?
I re-flashed it with LT4 via the network and all seemed fine for about a
day then it went off completely.
Now I can re-flash via the network or the serial port. It programs up OK.
But now when I power up the box does not boot at all.
The display sticks here :-
dhcp...
/flash/bootlogo.elf
Any ideas out there?