skywave
Regular Member
- Joined
- Dec 4, 2005
- Messages
- 53
- Reaction score
- 0
- Points
- 0
- Age
- 69
- My Satellite Setup
-
One 100cm dish with 3 Universal Quattro 0.6db LNBs at 28.2E, 19.2E, 13.0E..
One 85cm dish with 1 Universal Quattro 0.6db LNB at 0.9W..
4 - 4x1 DiSEqC switches..
DM8000HD, DM7020S, HUMAX VACI-5300, OPENTEL ODS 4000F
- My Location
- Luxembourg City
just purchased a dm8000 - i am used to a dm7020 and able to manage that one ok - but this new box is puzzling me.
i am not able to format and mount a usb stick via flashwizard pro and also via dcc 2.96 it is not possible.
in dcc i get this output:
mount /dev/scsi/host0/bus0/target0/lun0/disc /var/mnt/usb; echo "
>>> DONE <<<";
mount: mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/mnt/usb failed: No such file or directory
>>> DONE <<<
root@dm8000:~#
any ideas?
it is a bare box - with no hard drive so far - only the internal flash and then i want to add gemini and dreamboxedit files to a stick..
4 hours later:
in the meantime i stumbled over a google link for the dm8000 - the ihad site - where i see that i have to flash a dream elite black hole image in order to use a kernel compatible with the enigma2 system...
i am now sitting here flashing via a serial cable - dum-da-dum - takes time - more than an hour counting in dreamup..
oh well - a bit of wow while i wait..
just hope a checksum error does not pop up right before the end of the process - it happened earlier.. start over again - o-ooooo..
oh - and btw - i was not able to flash via browser. after doing the 'hold button and wait till ip pops' stuff - i opened browser - only to be presented with the dm8000 interface page (with channel, favourites, web tv and etc.)
i am not able to format and mount a usb stick via flashwizard pro and also via dcc 2.96 it is not possible.
in dcc i get this output:
mount /dev/scsi/host0/bus0/target0/lun0/disc /var/mnt/usb; echo "
>>> DONE <<<";
mount: mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/mnt/usb failed: No such file or directory
>>> DONE <<<
root@dm8000:~#
any ideas?
it is a bare box - with no hard drive so far - only the internal flash and then i want to add gemini and dreamboxedit files to a stick..
4 hours later:
in the meantime i stumbled over a google link for the dm8000 - the ihad site - where i see that i have to flash a dream elite black hole image in order to use a kernel compatible with the enigma2 system...
i am now sitting here flashing via a serial cable - dum-da-dum - takes time - more than an hour counting in dreamup..
oh well - a bit of wow while i wait..
just hope a checksum error does not pop up right before the end of the process - it happened earlier.. start over again - o-ooooo..
oh - and btw - i was not able to flash via browser. after doing the 'hold button and wait till ip pops' stuff - i opened browser - only to be presented with the dm8000 interface page (with channel, favourites, web tv and etc.)