Dm800hd pvr

Q

qimmy

Member
My Satellite Setup
DM800HD PVR
My Location
Kosova
Can somebody help me ?
I have 3 lnb's but i don't know how to configure the tuner . I use a diseqc 2.0 switch 4x1* (4lnb to 1 reciever)
My config.
Configuration mode : Simple
Mode : DiSEQc A/B/C/D
Port A : Eutelsat (15.8E)
Port B : Hotbird (13.0E)
Port C : Astra (19.2E)
Port D : nothing connected
Set voltage and 22Khz : Yes
Send DiSEQc only on satelite change : No
Tone amplitude : 800mV

I only can watch lnb 1 (15.8E)
 
Probably a dodgy DISEqC switch. I have a tendency to find that the cheaper DISEqC switches behave in the way you are describing.. What brand of DISEqC switch is it?
 
I also had the same problem with a global switch.
I had to set it to advanced mode and then set each lnb number in the menu.
Each lnb number then got assigned a satellite and disecq setting if that makes sense. It seemed to work after that.
If could also be a dodgy switch causing that as well.
 
Hixxy1 I also tried with advanced but not working. I tried 3 switches still don't work. the voltage from my dm800 is 18 volt . just lnb1 is working not the others, i think the problem is with voltage. it has no power to open other lnb's
 
Its a hell to get the Diseqcs switch to work with the DM800. However here is my setup (I hope its unsderstandable, even if its in swedish).
Im using a 4-way EMP-Centuari. The spaun switches are recommended by many proffessionals, but I found it too expensive..
Good luck!

(Im sorry for the text-format, no way to paste tabs into this forum)..

Code: 
hotbird 13 Ö Sirius 4.8 Ö Thor 1 W
LNB  1 2 3
Prioritet  auto auto auto
LOF Universal LNB Universal LNB Universal LNB
Späningsläge Polarisation Polarisation Polarisation
ökad spänning nej nej nej
Tonläge Band Band Band
Diseq läge 1.0 1.0 1.0
Toneburst  A A A
Comitted d com. AB AA BA
Snabb DiSeq nej nej nej
repetera sek ja ja ja
kommando ord comitted, toneburst comitted, toneburst comitted, toneburst
ton amplitud 340 mV 340 mV 340 mV
600 600 600
 
Back
Top