dragon cam keys editing
- Thread starter nr66
- Start date
hi,
Here's a quicky on how to edit your New Matrix Reloaded Keys into a DRAGON CAM.
you must be on a FTA channel before you begin.
1- Go into MENU in your receiver remote control.
2- Go into CONDITIONAL ACCESS again with your remote control.
3- Go into PREDATOR Version with your remote control.
4- Go into DEBUG with your remote control.
5- For example,Go into NAGRAVISION
6- Go into for :- Digital+ 4101 ; TV Cabo 4901 ; Polsat 7101
7- In each one of either Digital+ or TV Cabo or Polsat you will see a choice of 2 key lines to edit: 00 or 01
8- In todays example there has been a change in Digital+ key line 01
9- Choose key line 01 and then you will see 3 small question marks. There you enter the keys which are in digits. For example todays set of 8 keys are available when you download the files like xamuh or mach1 etc.
10- Once you have entered those 8 sets of 3 digits. The menu will save. them
11- Change any other keys you like , and check the keys on screen against the ones you have wrote down.
12- Exit out of all of the menus until you come back to your FTA channel.
13- Switch ON your receiver and go into a scrambled signal.
You should now be able to watch Digital+ or whatever you have changed
ps.this was written a couple of months ago,but gives you an idea of what to do.
Here's a quicky on how to edit your New Matrix Reloaded Keys into a DRAGON CAM.
you must be on a FTA channel before you begin.
1- Go into MENU in your receiver remote control.
2- Go into CONDITIONAL ACCESS again with your remote control.
3- Go into PREDATOR Version with your remote control.
4- Go into DEBUG with your remote control.
5- For example,Go into NAGRAVISION
6- Go into for :- Digital+ 4101 ; TV Cabo 4901 ; Polsat 7101
7- In each one of either Digital+ or TV Cabo or Polsat you will see a choice of 2 key lines to edit: 00 or 01
8- In todays example there has been a change in Digital+ key line 01
9- Choose key line 01 and then you will see 3 small question marks. There you enter the keys which are in digits. For example todays set of 8 keys are available when you download the files like xamuh or mach1 etc.
10- Once you have entered those 8 sets of 3 digits. The menu will save. them
11- Change any other keys you like , and check the keys on screen against the ones you have wrote down.
12- Exit out of all of the menus until you come back to your FTA channel.
13- Switch ON your receiver and go into a scrambled signal.
You should now be able to watch Digital+ or whatever you have changed
ps.this was written a couple of months ago,but gives you an idea of what to do.
I also saw all functions mentioned as above but where do i obtain new ones