dream 500 no signal problem

[newdream]

i buy 2 pieces of dream 500 china


now after 1 weak i have problem

2 dreambox work 5 minutes then when change the channel no signal

i check tuner output only 4 volt

i change the adapter same problem.


if i take out dream 20 minutes it will work again then no signal


please can you tell me the problem is from tuner or processor

regards

 

[northernmonkey]

are they the fake ones ???

h__p://www.dream-multimedia-tv.de/english/dm500_copy_eng.php


karl

 

[newdream]

no

difrent

 

[tareqs]

Dear Newdreeam
Have you got any information regsrding thid problem?
could you give me what ist the latest with you? i now have the same problem, but for me i changed the adapter once and it was ok , but now with new adapter i have no signal
thanks a lot

 

[Tee_111]

Try factory resetting, if same problem, then you might need to reflash the box.

 

[arth]

ive had tons of issues with my clone, eventually i blew up messing about.
after repairing the psu i was left with a similiar fault, i had no options left my tuner wanst seeing a single thing. ber was there then 0 then fa it had signal with no feed even.,
so i ran a wire from the left of the diode just above the power socket to diode just below the tuner it now runs fine, im not sure how safe a cure this is, but seems to worf for me,.
diodes marked d46 and one by tuner is d70 bit awkward to see cos tuner sits above it, but easy enuff to get at the points underneath, entirly up to u if you chance it though
it wont blow the box mines been ok for days.