Dreambox 500 - JTAG Information

[Sharkadder]

a mates got this working with jtag, took him a good hour but after abit of playing it finally connected.

ciao

 

[philip633]

some photo of successes restored

Bienvenidos Amigos!!!

 

[freon]

The power suply has to be pluged intro DM instantly when you click connect on the program!
Power suply has to be a good one.

 

[bg4vhj]

he he
i made it
i through JTAG interface to write bootloader file in my DM500S then RS232 can be used,my DM500S working..

Thank all

Has anyone cannot achieve, I will give some explanations

Sorry about my English!

 

[garryh]

hello i am still having trouble i cannot get it to work
any help would be good bg4vhj

 

[freon]

The power suply has to be pluged intro DM instantly when you click connect on the program!Power suply has to be a good one.

 

[rmontoya]

That´s ok now.

You have to keep trying the CONNECT/power in the power suply and try to "adjust" your react time considering the error that you have, if you get comunication error you are pluging the power suply to slow, but you should reduce the time between the CONNECT/power in the power suply.

In my case I had to repeat this process about 25 times.

good luck

 

[bajm6277]

Anyone for an image with a real mac address so u can get online again????????

Here ya go.

_http://www.sendspace.com/file/hjk33g

Just rename to blimg & put it in your jtag folder.

 

[bg4vhj]

i have made a new BOOTLOADER file and it's MAC address not is 000

you download it then through JTAG interface write it in you DM500S,you find your DM500S not is a clone dreambox!!

hit this url to download the BLIMG
_http://www.anonym.to/?http://www.52sat.cn/attachment.php?aid=321

 

[camoufle]

Good, thank you

 

[bg4vhj]

download this bootloader file !mac address not is 000

 

[kornholio]

Thank you all guys.
This forum is a dreambox bible..
:-worship

My box is alive again.
And not just alive.. it is considered "genuine" too thanks to the last blimg that bg4vhj uploaded!

Special thanks to philip633 and freon.

Something that may be helpfull:
I had unsuccessfull results with an ibm thinkpad laptop that has a parallel port (bi-directional).
When i connected the jtag cable to a desktop pc with a parallel port (ECP+EPP) it needed only 5 tries.

 

[philip633]

download this bootloader file !mac address not is 000

Hello

this bootloader file you make test in dm500 with orange led on lan or use in dm500 with normal green led on lan ?

i use the mac-generator to make new bootloader file with mac 00:09:34.....like your file to no have 00:00:00:00 mac and no work in this dm500 (dm500 with orange led in lan)
work only in dm500 to have the green led...


ragards

 

[bg4vhj]

Hello

this bootloader file you make test in dm500 with orange led on lan or use in dm500 with normal green led on lan ?

i use the mac-generator to make new bootloader file with mac 00:09:34.....like your file to no have 00:00:00:00 mac and no work in this dm500 (dm500 with orange led in lan)
work only in dm500 to have the green led...


ragards

my upload file not is use the mac-generator made...it is i modify from the old bootloader file with 0000 mac address and i use this bootloader file in my DM500S
it is working now!!

 

[gasansat]

I have the exact same error
ERROR: register test failed
Check your JTAG/LPT1 connection and/or adjust your voltage regulator
Any ideas??

 

[philip633]

I have the exact same error
ERROR: register test failed
Check your JTAG/LPT1 connection and/or adjust your voltage regulator
Any ideas??

try this _http://www.sendspace.com/file/75zmpr

working in dos command....and read again all in this Thread ....
http://www.satellites.co.uk/satellite/736304-post71.html
http://www.satellites.co.uk/satellite/736310-post73.html

 

[angusc]

Guys,

I missed dooms day with my clone box as i was travelling and had my DM500 with me in my suitcase! However i have now changed my MAC address using TELNET and the FORMAT option. My question is, can i now safely use my DM500 without fear...for the time being? Also how do i tell which version of Gemini Project is installed in my clone? When i go to the "About" screen in the menu it says "Software Version: release 4.2.0. 17.12.2007 Chinese language by satfan".

EDIT: when i restart the box i get the old MAC address back......is the TELNET FORMAT option only a temporary MAC change solution? How can i do it perminantly without the JTAG?

Thanx M8's

 

[mhku]

Gemini 4.20

You need to keep the init file in /etc to reset your MAC address on each restart; the other methods discussed may be more permanent but I've not tested any of the MAC address methods.

 

[bg4vhj]

Guys,

I missed dooms day with my clone box as i was travelling and had my DM500 with me in my suitcase! However i have now changed my MAC address using TELNET and the FORMAT option. My question is, can i now safely use my DM500 without fear...for the time being? Also how do i tell which version of Gemini Project is installed in my clone? When i go to the "About" screen in the menu it says "Software Version: release 4.2.0. 17.12.2007 Chinese language by satfan".

EDIT: when i restart the box i get the old MAC address back......is the TELNET FORMAT option only a temporary MAC change solution? How can i do it perminantly without the JTAG?

Thanx M8's

google translation of removed Chinese:

Since the Chinese people, Chinese啦, Oh, if you modify unreasonable JTAG BOOTLOADER bottom of the MAC address, it is not the way. For you to revise the profile in the system that is only useful if heavy brush system or restore factory settings on the back! !
If it can increase QQ：99986777

This is BG4VHJ​

 

[camoufle]

Thank You Very Mutch