freon said:JTAG works
This morning I repaired 5 "adios amigos" boxes!
freon said:JTAG works
This morning I repaired 5 "adios amigos" boxes!
freon said:Oh yes I did several boxes ;)
freon said:XP SP2 PC used
ECP+EPP printer port setup + never use interrupt
DB25 male printer connector
6 wieres + 5 resistors of 100 ohms
ON printer connector short connect pin 18 to 25 and connect the last wire.
rest of the wieres connect the resistors and use the schematics placed on the RDI.
When You hit the connect simultaniously place the power to dream.
That should do it!
:-Nooofreon said:Oh yes I did several boxes ;)
freon said:XP SP2 PC used
ECP+EPP printer port setup + never use interrupt
DB25 male printer connector
6 wieres + 5 resistors of 100 ohms
ON printer connector short connect pin 18 to 25 and connect the last wire.
rest of the wieres connect the resistors and use the schematics placed on the RDI.
When You hit the connect simultaniously place the power to dream.
That should do it!
genlabs said::-Nooo
hi,
I followed your method and exact pinning as written in first post by admin.
I tried many times but i get this message from the software:
***CPU and JTAG communications check***
ERROR: communication with LPT/JTAG
ERROR: register test failed
Check your JTAG/LPT1 connection and/or adjust your voltage regulator
Have you any idea what is happening? I became sick checking and checking all day, but nothing's wrong.:-worship