Dreambox Edit Query

S

SG8

Member
Messages
15
Likes
0
My Satellite Setup
Was DM500S, now TM500, working on TM9100S
My Location
Dublin
#1
:confused
I have tried to follow the dreambox edit tutorial

http://www.satellites.co.uk/forums/...ial-dreambox-edit-create-backup-bouquets.html

And thought I was going fine, but was just wondering if the file paths have to be changed depending on the image used on the box ? I selected SATELITE RECEIVER as I have a DM500S , and I can receive the files from the box, edit them, save changes but when I try to send the files to the dreambox I get the following message:

Starting FTP transfer
Transfer complete
** Sending file "/var/tuxbox/config/enigma/lamedb" **
Starting FTP transfer
Transfer aborted
Error sending file "lamedb" to the Dreambox.

Am hoping I am missing something simple but all suggestions welcomed!!!:confused
 
Llew

Llew

cerca trova...
Staff member
Messages
14,515
Likes
3,433
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#2
The transfer should have been completed. Reboot your box when that message appears.
 
Llew

Llew

cerca trova...
Staff member
Messages
14,515
Likes
3,433
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#3
...Unless you have the wrong Enigma version in your Dreambox Edit settings. Should be Enigma 1.
 
S

SG8

Member
Messages
15
Likes
0
My Satellite Setup
Was DM500S, now TM500, working on TM9100S
My Location
Dublin
#4
Thanks for that, I got it sorted, when I went to opened the B16MCC Sky UK bouquets, they showed as TYPE4, so when I transferred them across they must have been going across as I was able to take them back from the box also.

So the problem was solved by opening the bouquets and then changing the type to TYPE2, saving and then transferring them across to the box.


Might be of use to someone who runs into the same problem?!

Thanks for the repsonses!!
 
Llew

Llew

cerca trova...
Staff member
Messages
14,515
Likes
3,433
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#5
Yes, Type 2 for Enigma 1, Type 3 or 4 for Enigma 2 (which I use for my DB8000).

Glad you're OK now.
 
S

SG8

Member
Messages
15
Likes
0
My Satellite Setup
Was DM500S, now TM500, working on TM9100S
My Location
Dublin
#6
Yes, I had set the type correctly but then when I opened the bouquets that I downloaded, it was changing back to type4 (without me noticing of course!!!), so I just had to open the bouquets, change the type back to type2, save the changes and then upload them to the box.

Am sorted (for now!!) I think!!

Thanks again
 
F

fintannl

Regular Member
Messages
257
Likes
0
My Satellite Setup
Single Sat Dish and DM800
My Location
Ireland
#7
don't worry sg8, you are not the first and won't be the last to get caught out by this. its not a fault of the B16MCC bouquets, just a peculiarity of dreamboxedit.
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
Likes
8
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
#8
guys just a note for you. The type you need is relative to the version of the lamedb file that your box uses. If you do a sat scan yourself your box will create a lamedb file. In the first line of the lamedb file it ends with /4/ or /3/ or what ever.

This is the version of the lamedb and hence the DBEDit setting.
 
S

SG8

Member
Messages
15
Likes
0
My Satellite Setup
Was DM500S, now TM500, working on TM9100S
My Location
Dublin
#9
Thanks for that, the bouquets are great!!!
 
Top