longstockings
Satellite Whore
- Joined
- Jun 28, 2004
- Messages
- 148
- Reaction score
- 3
- Points
- 0
- Age
- 44
- Website
- www.tm9100.co.uk
- My Satellite Setup
-
Technomate 1500 CI+
80cm Polycarbnate Dish
0.3db Universal LNB
Moteck Digipower Motor
- My Location
- Totnes, Devon 50.4320N, 3.6690W
I have a diseqc 1.2 aston tracsat motor installed and connected to my Dreambox 7000s however I have not been able to get the thing to move.
At the motor settings screen I can only set the power to 99ma as the field only supports 2 chars but I need to be able to enter 3.
Is this a software problem ?
I am not 100% sure what image it uses as I have not played with past the factory defaults. It's an sfteam image and the Dreambox display says 1.08 if thats any help. I would prefer to use a hydra image as they seem more popular.
Has anyone had this problem b4 ?
The motor manual unfortunately is in French and I have been unable to find an English manual
This is my first and maybe last motorised dish setup.
The fun continues
At the motor settings screen I can only set the power to 99ma as the field only supports 2 chars but I need to be able to enter 3.
Is this a software problem ?
I am not 100% sure what image it uses as I have not played with past the factory defaults. It's an sfteam image and the Dreambox display says 1.08 if thats any help. I would prefer to use a hydra image as they seem more popular.
Has anyone had this problem b4 ?
The motor manual unfortunately is in French and I have been unable to find an English manual
This is my first and maybe last motorised dish setup.
The fun continues