Dreambox800 Clone I'm getting the error "ERR01 NO CA FOUND

B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Nabilo BlackHole bootloader 75#
I have update software option from the menu
Unfortunately something has gone wrong, now I'm getting the error "ERR01 NO CA FOUND" and its saying go to DM 7020 | dream-multimedia-tv.de
How can I get it back?

Please any advice help plz ... cost me 280 doll
 
B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Nabilo BlackHole bootloader 75#
I have update software option from the menu
Unfortunately something has gone wrong, now I'm getting the error "ERR01 NO CA FOUND" and its saying go to DM 7020 | dream-multimedia-tv.de
How can I get it back?

Please any advice help plz ... cost me 280 doll
 
gandalfthegrey

gandalfthegrey

Regular Member
Messages
391
My Satellite Setup
Dreambox 800HD (clone)
Gibertini 85cm dish
4 way Diseqc switch........
linksys access point connected to Dreambox..
My Location
dublin,ireland
Hi bolt..Is your machine definitley bootloader #75? This sounds like you tried to download a firmware newer than your bootloader is capable of handling (I could be wrong though) Have you tried to re flash the boot loader again...from what I have been reading this is a soloution..report back
gandalf

Edit:
1. make sure dm800 power not attached
2. put the serial cable from your pc to dm800.
3. click connect button on dreamup
4. now attached the dm800 power
5. the dreamup should be responded and start to upload
6. click flash and choose the secondstage loader which suit to your dm800 sim card.for the clone one it should be #69 or #70. or what ever yours is
7. after flashing, plug the power of dm800 off and then plug it on. the dm will be normally rebooted.
 
gandalfthegrey

gandalfthegrey

Regular Member
Messages
391
My Satellite Setup
Dreambox 800HD (clone)
Gibertini 85cm dish
4 way Diseqc switch........
linksys access point connected to Dreambox..
My Location
dublin,ireland
Hi bolt..Is your machine definitley bootloader #75? This sounds like you tried to download a firmware newer than your bootloader is capable of handling (I could be wrong though) Have you tried to re flash the boot loader again...from what I have been reading this is a soloution..report back
gandalf

Edit:
1. make sure dm800 power not attached
2. put the serial cable from your pc to dm800.
3. click connect button on dreamup
4. now attached the dm800 power
5. the dreamup should be responded and start to upload
6. click flash and choose the secondstage loader which suit to your dm800 sim card.for the clone one it should be #69 or #70. or what ever yours is
7. after flashing, plug the power of dm800 off and then plug it on. the dm will be normally rebooted.
 
B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Thanks
i will try Today.....
secondstage loader which suit to your dm800 sim card ?
SIM201e​-75-NabiloBla​ckHole​_DM800​_012​.rar

_http://www.filefactory.com/file/a07a793/n/SIM201e-75-NabiloBlackHole_DM800_012.rar?e=WW91ciBkb3dubG9hZCBzbG90IGhhcyBleHBpcmVkLiAgUGxlYXNlIHRyeSBhZ2Fpbg%3D%3D&l=&c=57645f1e0acc33cc7085f61f874f996e
 
B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Thanks
i will try Today.....
secondstage loader which suit to your dm800 sim card ?
SIM201e​-75-NabiloBla​ckHole​_DM800​_012​.rar

_http://www.filefactory.com/file/a07a793/n/SIM201e-75-NabiloBlackHole_DM800_012.rar?e=WW91ciBkb3dubG9hZCBzbG90IGhhcyBleHBpcmVkLiAgUGxlYXNlIHRyeSBhZ2Fpbg%3D%3D&l=&c=57645f1e0acc33cc7085f61f874f996e
 
B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Dreamup CAN NOT CONNECT TO DREAMBOX800HD << Is this a question ? - DreamUp Can Be Used With A DM800 - B16MCC.

IM USING THIS CABEL
ebay 300360016722
+ _http://www.amazon.co.uk/exec/obidos/ASIN/B000Q8FDAS/ref=ox_ya_oh_product

I SEEN ANOTHER CABEL SHOULD BE RIGHT FOR ME ?
New USB to RS232 9 Pin Serial Cable - Female
ebay 170353492151

Thanks

Admin note - Please disable links as per the forum rules and guidelines
 
B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Dreamup CAN NOT CONNECT TO DREAMBOX800HD << Is this a question ? - DreamUp Can Be Used With A DM800 - B16MCC.

IM USING THIS CABEL
ebay 300360016722
+ _http://www.amazon.co.uk/exec/obidos/ASIN/B000Q8FDAS/ref=ox_ya_oh_product

I SEEN ANOTHER CABEL SHOULD BE RIGHT FOR ME ?
New USB to RS232 9 Pin Serial Cable - Female
ebay 170353492151

Thanks

Admin note - Please disable links as per the forum rules and guidelines
 
gandalfthegrey

gandalfthegrey

Regular Member
Messages
391
My Satellite Setup
Dreambox 800HD (clone)
Gibertini 85cm dish
4 way Diseqc switch........
linksys access point connected to Dreambox..
My Location
dublin,ireland
Is that a null modem cabel bolt? as far as ai know it should be...why don't you flash from the web interface...Spoke to the guy who sold me my clone and he reckons there is no BL75..
 
gandalfthegrey

gandalfthegrey

Regular Member
Messages
391
My Satellite Setup
Dreambox 800HD (clone)
Gibertini 85cm dish
4 way Diseqc switch........
linksys access point connected to Dreambox..
My Location
dublin,ireland
Is that a null modem cabel bolt? as far as ai know it should be...why don't you flash from the web interface...Spoke to the guy who sold me my clone and he reckons there is no BL75..
 
selector

selector

Member
Messages
46
My Satellite Setup
DM800HD, Multifeed Gibertini 105
My Location
Mediteran
Certification Authority not found.
wrong sim answer ... probably must downgrade SSL


I. The onlything a hav´t test is this
1. Connect a working drembox with dreamup.
2. click connect (Dreamup find the working dreambox)
3. Remove serial(Null) Cabel from working dreambox
4. Connect Serial(Null) cabel to dead dm.
5. Power on dead dm
6. Flash.

II. use enforcer

how to use enforcer
1) connect dead box to dreamup, press connect
2) press ok at ca error popup, any error just press ok
3) download enforcer
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now


To explain all qestion about file to big!!

1. switch on enforcer press enable
2. Run dream up and press connection
3. Switch on dm800 (should send now BL to box)
4. If dreamup succesfully send BL to box (doing this automaticly when you plug in power cable to box)
5. shout down dream up and enforcer
6. shout down box, switch on dream up (just dream up! press connection)
7. switch on box
8. now when everything goes ok, you are able again to flash box

*special DreamUp & enforcer:

*ttp://rapidshare.com/files/289346941/2nd_stage_pack.rar ;)
 
selector

selector

Member
Messages
46
My Satellite Setup
DM800HD, Multifeed Gibertini 105
My Location
Mediteran
Certification Authority not found.
wrong sim answer ... probably must downgrade SSL


I. The onlything a hav´t test is this
1. Connect a working drembox with dreamup.
2. click connect (Dreamup find the working dreambox)
3. Remove serial(Null) Cabel from working dreambox
4. Connect Serial(Null) cabel to dead dm.
5. Power on dead dm
6. Flash.

II. use enforcer

how to use enforcer
1) connect dead box to dreamup, press connect
2) press ok at ca error popup, any error just press ok
3) download enforcer
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now


To explain all qestion about file to big!!

1. switch on enforcer press enable
2. Run dream up and press connection
3. Switch on dm800 (should send now BL to box)
4. If dreamup succesfully send BL to box (doing this automaticly when you plug in power cable to box)
5. shout down dream up and enforcer
6. shout down box, switch on dream up (just dream up! press connection)
7. switch on box
8. now when everything goes ok, you are able again to flash box

*special DreamUp & enforcer:

*ttp://rapidshare.com/files/289346941/2nd_stage_pack.rar ;)
 
B

boltakal

Member
Messages
12
My Satellite Setup
Dreambox 800 hd
My Location
UK
Thanks 1000 Time
I Get flash new Image on my dreambox800 Working fin ..
 
A

A nonymous

Member
Messages
3,586
You may find this website useful if you have a clone :D

Code:
http://www.8a8f8.com/ubbthreads.php/forums/3/1/Patched_NFI_Images_for_DM800
:-beer

Nano
 
W

wannabee

Regular Member
Messages
171
My Satellite Setup
Vu+ Duo with 1TB HDD, Vu+ Solo with 500GB HDD, Dm7025 with 80GB HDD &amp; 1m Triax
Advent 9415 lappy
My Location
Co. Tyrone
Hi guys..

I got my DM800 a few days ago.. and when i done a software update i got the same message ERR01 NO CA FOUND..

My problem is i dont have a com port in my lappy.. so therfore can not use dreamup..

Is there any other way of doing this please.. ??

Thanks
 
gandalfthegrey

gandalfthegrey

Regular Member
Messages
391
My Satellite Setup
Dreambox 800HD (clone)
Gibertini 85cm dish
4 way Diseqc switch........
linksys access point connected to Dreambox..
My Location
dublin,ireland
Hi wannabee..you can get a USB to Serial cable and use it with your null modem cable,that will do the job if there is no com port, takes a bit of messing about but it does work.I have the same issue with no com port on my lappie and this is how I flashed my image...My 800 locked up over the weekend and I couldn't communicate through the web interface.I'm sure there is a "how to" somewhere on this site...good luck
gandalf
 
W

wannabee

Regular Member
Messages
171
My Satellite Setup
Vu+ Duo with 1TB HDD, Vu+ Solo with 500GB HDD, Dm7025 with 80GB HDD &amp; 1m Triax
Advent 9415 lappy
My Location
Co. Tyrone
gandalfthegrey said:
Edit:
1. make sure dm800 power not attached
2. put the serial cable from your pc to dm800.
3. click connect button on dreamup
4. now attached the dm800 power
5. the dreamup should be responded and start to upload
6. click flash and choose the secondstage loader which suit to your dm800 sim card.for the clone one it should be #69 or #70. or what ever yours is
7. after flashing, plug the power of dm800 off and then plug it on. the dm will be normally rebooted.
This works like a dream if you pardon the pun.. lol

Thanks gandalfthegrey..
 
gandalfthegrey

gandalfthegrey

Regular Member
Messages
391
My Satellite Setup
Dreambox 800HD (clone)
Gibertini 85cm dish
4 way Diseqc switch........
linksys access point connected to Dreambox..
My Location
dublin,ireland
Good news...enjoy :-thumbup
 
I

isottina

Member
Messages
1
My Satellite Setup
dm800
My Location
italy
selector said:
Certification Authority not found.
wrong sim answer ... probably must downgrade SSL


I. The onlything a hav´t test is this
1. Connect a working drembox with dreamup.
2. click connect (Dreamup find the working dreambox)
3. Remove serial(Null) Cabel from working dreambox
4. Connect Serial(Null) cabel to dead dm.
5. Power on dead dm
6. Flash.

II. use enforcer

how to use enforcer
1) connect dead box to dreamup, press connect
2) press ok at ca error popup, any error just press ok
3) download enforcer
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now


To explain all qestion about file to big!!

1. switch on enforcer press enable
2. Run dream up and press connection
3. Switch on dm800 (should send now BL to box)
4. If dreamup succesfully send BL to box (doing this automaticly when you plug in power cable to box)
5. shout down dream up and enforcer
6. shout down box, switch on dream up (just dream up! press connection)
7. switch on box
8. now when everything goes ok, you are able again to flash box

*special DreamUp & enforcer:

*ttp://rapidshare.com/files/289346941/2nd_stage_pack.rar ;)
I have the problem
I did not understand "3. Switch on dm800 (BL should now send to box).
How do I send the BL dm800? with dreamup? and when before it begins to load the loader?
Thanks for the help they give me.
 
S

seyal30

Member
Messages
11
My Satellite Setup
Apex 300
My Location
Israel
I have same problem, the first time I Upgraded using lan the I got the message "ERR01 NO CA FOUND (Using a serial Null cable)
I tried all methods as folows: first computer (mine with windows xp p3 & asus motherboard
that I aded an accessorie to connect Serial port but when I try connecting thru DreamUp I get "cannot Open Port" , Then I used an older computer with windows xp1 - when I press connect thru DreamUP I get connected with no messages - I then turn on the connected dreambox - nothing happens I stil get ERR01 NO CA FOUND ->no boot loader being uploaded to dream box - just nothing happens used enforce to enable grayed flash the when I try to flash either any bootloader or nfi image I get FILE TO BIG!
the third computer I used a P3 733 with two on board serial ports with windows ME, I started dreamUP then pressed connect -> I got message from dreamup that Port was open please turn on dreambox --> when I turn it on nothing happens
Please Update me if I am doing anything wrong.
The cable is a NULL modem cable (cossed serial female to female new cable)
tried multiple versions of dreamUP 1.332 ,1.334 & tried the two ports on the Pentium3 with no success
 
Top