East London, E14

BornEvil

Member
Joined
Jun 5, 2010
Messages
0
Reaction score
0
Points
0
Age
39
My Satellite Setup
TD78: multifeed with 9E, 13E, 19.2E, 23.5E. Sky Zone 1 @28.2E
My Location
London
Hi guys,

I just moved house so need a pro to install my setup.

I required installation of a multi feed dish centred on 13e, with 4 LNBs. Pointing @ 9e, 13e, 19.2e and will try my luck with 0.8W. all with quad LNBs.

I already have most of the parts.

Will need to be installed about 7 meters high (2nd floor of townhouse), but easy access from a window, so may not require ladder (although I much preferred to install away from the window).

These are the parts I have already bought (all brand new):

Triax TD78
Triax multi LNB bracket
4x Quad LNBs 40mm, pretty thin (will replace 2 with Alps if required for 9e and 13e)
Loads of F connectors
Loads of Coax (7mm shotgun, already drilled and laid under floor when decorating).

So i still need supplying of 4x 8/1 Diseqc and a good wall mount.

Please email me price just for labour.
 

satelliteman

Administrator
Staff member
Joined
May 7, 2007
Messages
12,039
Reaction score
387
Points
83
My Satellite Setup
See signature
My Location
Northants, Midlands UK & Lanzarote, Canary Islands
No one can email you. We specify that you don't post email addresses. Once you get a reply/installer, we will activate PM facility for further communication.

Think you may need 4x 4/1 DiSEqC switches :)
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
Could you please post a photo of the intended install location,thanks.
 

BornEvil

Member
Joined
Jun 5, 2010
Messages
0
Reaction score
0
Points
0
Age
39
My Satellite Setup
TD78: multifeed with 9E, 13E, 19.2E, 23.5E. Sky Zone 1 @28.2E
My Location
London
@satelliteman, ok m8, my bad. i will be getting 8/1 as i will be also combining a sky dish pointing at 28.2e (which i will be putting up myself, unless someone can do it dirt cheap ;) ) .

@Robbo, i will post a picture ASAP, the dish is already built, with all lnbs loosely secured, all 16 cables cut ready to plug into diseqc. i just need you to get up there and adjust the lnbs with a meter.
 

BornEvil

Member
Joined
Jun 5, 2010
Messages
0
Reaction score
0
Points
0
Age
39
My Satellite Setup
TD78: multifeed with 9E, 13E, 19.2E, 23.5E. Sky Zone 1 @28.2E
My Location
London
uploaded picture. satelliteman, please enable PM for me.

sorry i cant get a picture of the whole building as the back garden is very small.

The building wall is pretty much facing 28.2, as my neighbours sky dishes are all flat against the wall.

The hole for the 4 coax cables is already drilled and threaded.

Preferred position is any where between position 1 to 2. basically the higher the better.

any position lower than 2 may have obscured line of sight cos of a tree 7 meters away.
 

Attachments

  • DSC00037.JPG
    DSC00037.JPG
    245 KB · Views: 51

satelliteman

Administrator
Staff member
Joined
May 7, 2007
Messages
12,039
Reaction score
387
Points
83
My Satellite Setup
See signature
My Location
Northants, Midlands UK & Lanzarote, Canary Islands
BornEvil said:
satelliteman, please enable PM for me.


As a new user, we can only activate PM facility if another member replies/agrees to carry out the work.
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
Looks reasonably accessible, I would be interested in doing the job, if you could please PM me BE.
 

BornEvil

Member
Joined
Jun 5, 2010
Messages
0
Reaction score
0
Points
0
Age
39
My Satellite Setup
TD78: multifeed with 9E, 13E, 19.2E, 23.5E. Sky Zone 1 @28.2E
My Location
London
sorted thanks to robbo
 
Top