Edision Primo IP S2 Latest Firmware

Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,315
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Firmware V .62 is available:

Via Interweb for those using stock Firmware

Via Downloads for those using modified Firmware

Improvements to stability of DVB Subtitles on HD Channels

Also, a Scan option "Renew Channels Data" has been introduced, but I'm not at all sure what it actually does!

I did select it when rescanning 5W12606 to restore Rete4 HD but to what effect?
 
S

Stevenvc19

Member
Messages
38
My Satellite Setup
Edision Primo S2:
5W
9E
13E
19.2E
28.2E
My Location
Willebroek Belgium
If you select “Renew channels Data” the new parameters of the channel that is broadcasted will be used instead of the old ones.
Eg. when a channel changes its name or when another channel broadcasts with the parameters of an old channel, the new name will be overwritten in your channel list
Or when a channel/transponder stops broadcasting the channels that will give “no signal” will be deleted
 
Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,315
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
^^^^^^^

Makes sense. Thanks.
 
RustySpoons

RustySpoons

Sleepy Hollow
Messages
2,207
My Satellite Setup
50E - 30W
CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 50W829 DVB-S2 Tuner
My Location
South Wales
Why have they left the broken Kodi in all these updates, surely it's just a waste of flash.
 
william-1

william-1

Super Moderator
Staff member
Messages
8,080
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra 0.2
(50 east to 45 west)
TM6902HD (A/B switch) Edision Primo S2
88cm Dish +Inverto Black Ultra 0.2
(53 east to 45 west)
Octagon SX88+(A/B switch), Amiko A4K

45cm SpiderboxHD9000
My Location
Epping Forest Essex
Why have they left the broken Kodi in all these updates, surely it's just a waste of flash.
Yes a total waste but like most software writers they are move onto another project :(:N
 
S

Stevenvc19

Member
Messages
38
My Satellite Setup
Edision Primo S2:
5W
9E
13E
19.2E
28.2E
My Location
Willebroek Belgium
I have the .63 firmware in my mailbox, but I don't know how to upload it here. The file is too large to process...
 
S

Stevenvc19

Member
Messages
38
My Satellite Setup
Edision Primo S2:
5W
9E
13E
19.2E
28.2E
My Location
Willebroek Belgium
Does anyone know how to upload it to someone of sat-soft so they can modify it and make it public?
 
Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,315
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Does anyone know how to upload it to someone of sat-soft so they can modify it and make it public?
If past performance is a guide, it'll happen within a few days .....


What fixes/enhancements does it include? Have they got Kodi working properly?
 
S

Stevenvc19

Member
Messages
38
My Satellite Setup
Edision Primo S2:
5W
9E
13E
19.2E
28.2E
My Location
Willebroek Belgium
If past performance is a guide, it'll happen within a few days .....


What fixes/enhancements does it include? Have they got Kodi working properly?
I have this firmware in my mailbox since October last year so I guess I’m the only one who has the firmware because I don’t find anything else on the internet!
I don’t have the .63 installed because I use the modified.62 so I can’t tell you exactly what’s new.

I called Edision today to ask if they had any more news about the subtitles that won’t work properly... but they didn’t have anything new. Strange they never released the .63 officially!
 
C

campag5242

Member
Messages
39
My Satellite Setup
Dishes: TD110, TD88
Receivers: SF4008, SX88, Samsung TV
My Location
NW UK
Best I can remember (without digging out my mothballed Primo IP S2), the running out.elf STB app's memory dumps indicated that sat-soft URLs, embedded within (for FW updates etc), *are* the official "unofficial" site. If they were going to release it, it would be there already I'd guess...

For those of us who don't care about the unofficial stuff on these boxes (eg I use my sx88 solely for its rapid blind scan... Edision should be identical there... but it's bugged/lagging in updates), an upload anywhere would be appreciated, in the hope that the rev update has any fixes for that user's particular issues.
 
P

paulvr

Member
Messages
27
Location
Nijmegen
My Satellite Setup
Dr.HD and Topfield
300 cm Unimesh C-Band on AJAK H2H mount
180 cm prime focus Ku-Band on AJAK H2H mount
My Location
Netherlands
Hi, I am using two Edision primo IP S2 receivers since about 4 months or so. The main reason is for me the T2-MI reception on 40 and 53 East (C-Band) plus all other streams that now are present at C-Band like on 10 degrees East while on Ku-Band (separate dish) the French, Italian and other streams can be viewed. A few remarks and questions:
1. As far as I understand Kodi will never work because the receiver has too little memory. I lack the technical knowledge to confirm yhis but I've seen this stated on other fora more than once.
2. In the info sheet it says "15000 channels TV & Radio programmable" but in reality I can do blindscans until I've got somewhere around 3000 TV stations (enough for one used for the C-Band) but the other one for Ku-Band stops adding channels after there's around that number in it's database. Is that your experience too or am I doing something wrong?
3. Certain streams like TV Castilla-La Mancha on Hispasat that was received without any problems on the Octagon sf4008 cannot be received with this receiver. BUT... for the Octagon it was necessary to enter all data manually to receive this transponder while as far as I can discover I cannot enter any specific details for scanning into the Edision primo receiver. Or can I? The extremely limited manual leaflet seems to give far less information than the receiver actually is capable of.
4. Can anyone tell me how to find and a enter IPTV stations in this thingy? I used to use my Xtrend ET 9500 successfully for this and edited the data with the E-Channelizer settings editor but this doesn't appear to work the same way with this one. I can by modifying the inlog parameters reach the Edision to move and alter sat channels but so far had no success with IPTV. Given the fact that IP is the first thing mentioned in the name of the receiver it's rather odd that I haven't been able to use that aspect of it yet.

I'd be most interested to learn much more about this receiver and therefore to get in contact with other users to be able to exchange further experiences with it.
 
P

paulvr

Member
Messages
27
Location
Nijmegen
My Satellite Setup
Dr.HD and Topfield
300 cm Unimesh C-Band on AJAK H2H mount
180 cm prime focus Ku-Band on AJAK H2H mount
My Location
Netherlands
I have this firmware in my mailbox since October last year so I guess I’m the only one who has the firmware because I don’t find anything else on the internet!
I don’t have the .63 installed because I use the modified.62 so I can’t tell you exactly what’s new.

I called Edision today to ask if they had any more news about the subtitles that won’t work properly... but they didn’t have anything new. Strange they never released the .63 officially!
Could you please tell me what a modified .62 software entails, Steven?
 
Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,315
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Top