Euro 1080 7E

thecaretaker

thecaretaker

Regular Member
My Satellite Setup
VU+ Ultimo, Duo2
85cm Fracarro Penta dish
Inverto BLACK Ultra QUAD
My Location
South East Coast, England
I've just updated the firmware in my box. I've had a check around and I am not getting any signals on 10880V 13333 @ 7E (HD1 and HD2) All the other tp's are working OK on 7E and elsewhere.

Can somebody check it out for me?

I'm not sure if these channels have stopped transmitting or if the firmware update is flawed for the reception of these HD channels.

I had a signal yesterday on the older firmware.
 
OK, I've put the original firmware in and I still don't have any signal on those channels. I've just looked outside (went out for a cigarette) and it is chucking it down - heavy thundery rain. It might be due to the heavy cloud. Then again, they may have folded?

That is the thing with double-glazing, you can't hear what is going on outside. :-DOH!
 
You should be OK on an 85cm dish in most weathers from where you are based.

Lyngsat claims the transponders are still alight.

_http://www.lyngsat.com/ew3a.html
 
I usually get a 95% signal from those transponders. Still nothing this morning. I'm getting to think they have gone down for some reason.

I can still pick up all the vertical transponders on Nilesat which is very weak for me, so I should get those on 7E without any problem.
 
Yay, they must have had problems.

HD3 is now transmitting FTA on HD1's spot. Enjoy the FREE HD while it lasts...

FTA

Label: HD1 (actually HD3)
Eutelsat W3A @ 7° East
10880 V 13333 FEC 4/5
DVB-S2/QPSK
PMT-PID 32
V PID 38
A PID 37
MPEG-4/HD


Enjoy!
 
Back
Top