Eurobird 9

S

sharp

Member
My Satellite Setup
My system: ARION-2000CICR, Samsung9500 VIACI, Twihhan DVB-S2 PCI, Terratec USB HD XS.
Motorized dish Triax 88A 85cm-95cm, STABHH100 motor, 1x Universal LNB.
My Location
Stockholm
Hello there!
I need some advise. I have a multifeed setup with 2 LNB. I want to get signal from Eurobird 9 sending Platform HD. I cannot get it. All other frequiencies working fine except these 2. I need 11881 V tp 58 and 11958 V tp 62. Looking the footprint it covers my area with very strong signal. I do not understand where the problem. I get all DVB-S2 signals from other sattelites. I use LNB B to get the signal wich is slightly of focus.
Any advises are welcome!

Thanks.
 
Burnham Beech said:
Lyngsat says these transponders are using DRE-Crypt.
Click to expand...
I know that but I am speaking about signal iself. My setup get no in any signals from these transponders while other transponders comming fine in.
 
Unless you have a Platform HD supplied box you cant watch them anyway so dont worry about it .
 
They come in fine here, but you need to edit the transponder details, DVB-S2 2/3 8PSK, does your receiver handle MPEG-4? There is only one I can watch though, FTV-HD on 11958, as it is free to air.

PS. You ought to put your location and equipment in your profile.
 
rolfw said:
They come in fine here, but you need to edit the transponder details, DVB-S2 2/3 8PSK, does your receiver handle MPEG-4? There is only one I can watch though, FTV-HD on 11958, as it is free to air.

PS. You ought to put your location and equipment in your profile.
Click to expand...

I am using my DVB-S2 pci card which working fine both with MPEG-4 and DVB-S2 standards. I see FTV-HD wo problems. Do you receive signals from transponders I mentioned above?
 
Yes, that's what I told you.:)
 
Sharp, leaving aside the problems you are having with those frequencies, what exactly are you trying to do / watch?
 
Analoguesat said:
Sharp, leaving aside the problems you are having with those frequencies, what exactly are you trying to do / watch?
Click to expand...
To watch of cause! The answer is obvious I think. But the problem should be solved step by step. No signal, no idea to solve the next one i.e. to decrypt whats is broadcasted.

KR
 
To decrypt it you need a subscription. DRECrypt is a fairly new encryption and you arent going to open it with keys or patches
 
Analoguesat said:
To decrypt it you need a subscription. DRECrypt is a fairly new encryption and you arent going to open it with keys or patches
Click to expand...
You are absolutly right here but to buy the subscription is not that difficult.
Nevertheless before talking that I need to understand why those 2 particular transponders are not seen by my system. Either the beem information on lyngsat is not corect or I have some problem with my setup.

KR
 
Lets see - can you see the scrambled KabelKiosk signals on

11862 H
27500 2/3

as active? These are also DVB-S2/8PSK transmission
 
Analoguesat said:
Lets see - can you see the scrambled KabelKiosk signals on

11862 H
27500 2/3

as active? These are also DVB-S2/8PSK transmission
Click to expand...

No, I cannot get this either. It seems to me that it is a signal issue or LNB setup. Do you think if I change LNB frequencies values it can help?
 
I suspect its your receiver.

Im not insulting your intelligence here, but you are scanning for scrambled signals arent you
 
Analoguesat said:
I suspect its your receiver.

Im not insulting your intelligence here, but you are scanning for scrambled signals arent you
Click to expand...

I do not think so. I can get any channels from other position including DVB-S2 wo problem.
Thanks anyway, will continue to search the problem.
 
If you do find out what the problem is please let us know the solution. It may help people in the future.

We know the transmissions are on air as Rolf can pick them up.
 
Back
Top