explain by pictures of J-tag the receiver flash(flash dump)for all 20 point jtag pad

[jack0]

soon i 'll put the complete explanations
sorry i'm so busy but quickly critical notes:
1. the distance between resisters and jtag pad should no more than 10 cm or will not work
2. the distance between resisters and lpt can be as u want
3.u can connect the resisters to jtag pad direictly
4.some receivers have 20 pin on board not only jtag pad so at this case u need 20 pin connector lick in 7 picture

 

[jack0]

________________________

 

[jack0]

________________________________________

_____________________________________________

 

[pmmali]

Hi
thanks for the post. but i cannot see any attached pictures. attached pictures are not vievable.

Regards.

 

[jack0]

and here the used program:
JTAG_UP_15_07_2005
the link
_http://www.dijitalboard.com/depo/index.php?action=downloadfile&filename=JTAG_UP_15_07_2005.ZIP&directory=J%20Tag%20Programlar%FD&
________________________________________
choose your lpt port then flash size then start then:
U should first erase current damaged flash then load new one
after finished u should click stor befor un plug electricity
if u have healthy flash u can make backup by choose read
______________________________
i'm searching for link for flash dump file:
and here some:
1. _http://www.digital-sistem.com/depo/index.php?direction=0&order=&directory=Flash%20Dump%20Files&PHPSESSID=a616e8f5f6bd7d64927e8e0b3aaa7002

2. _http://www.deposat.com/depo/forumdisplay.php?fid=18

3. _http://www.dijitalboard.com/depo/index.php?PHPSESSID=f699b622e74e37d9f14bba2ed088e145&direction=0&order=&directory=2-Flashdump%20Dosyalar%FD

4. _http://www.mavitunasat.net/index.php?PHPSESSID=b3a0d706ffa244c892d894c183512995&direction=0&order=&directory=FLASH_DUMP_FILES

5. _

______________________________

here can find starsat 550 650 3100 2100 3500 super flash dump file:
_http://www.deposat.com/depo/showthread.php?tid=114

 

[Lancelot]

Hi
thanks for the post. but i cannot see any attached pictures. attached pictures are not vievable.

They are now.
All attachments have to go through the moderation queue first.



L.

 

[Bussola]

Changes

Regards

 

[varonos]

jack0 how can load the flash file with this program(JTAG_UP_15_07_2005).

 

[surgeon]

soon i 'll put the complete explanations
sorry i'm so busy but quickly critical notes:
1. the distance between resisters and jtag pad should no more than 10 cm or will not work
2. the distance between resisters and lpt can be as u want
3.u can connect the resisters to jtag pad direictly
4.some receivers have 20 pin on board not only jtag pad so at this case u need 20 pin connector lick in 7 picture

Hello jack0
can you say me if this diagram works fine for starsat receiver (650ci)?

Thx


SuRgEoN

 

[surgeon]

soon i 'll put the complete explanations
sorry i'm so busy but quickly critical notes:
1. the distance between resisters and jtag pad should no more than 10 cm or will not work
2. the distance between resisters and lpt can be as u want
3.u can connect the resisters to jtag pad direictly
4.some receivers have 20 pin on board not only jtag pad so at this case u need 20 pin connector lick in 7 picture

Hello jack0
can you say me if this diagram works fine for starsat receiver (650ci)?
If yes, where can i find them (for ULTRA and not SUPER)
Thx a lot

Surgeon