EZdvbxl now version 2.45 on screen epg fixed plus lots more

[Big Ted]

EZdvbxl now version 2.45 on screen epg fixed plus lots more

You need re-create your favorite folders again from scratch. I'm sorry
Read !ReadMe&FAQ.txt for new Channel List management


INSTALL IN SEPERATE DIRECTORY, COPY TRANSPONDER FILES ACROSS, CHANGE LNB SETTINGS AND REDO FAVORITES.


many changes in channel list

- some basic info about working with EzDVB added. Read !ReadMe&FAQ.txt file please.
- now 255 favorites.
- each favorite folder can be named. look at favorites.ini
- enumeration of channels added. (only favorites can be enumerated)
- now channels may be switched by number entered from remote or keyboard. some option in General Settings.
- added switch /chnum <channel number> to command line.
- removed HotChannels. since it's no needed now anymore,
- added management of channels group (multiselect)
- Exiting while FullScreen active - remembered fullscreen coordinates. FIXED.
- skinless mode not fully fullscreened. FIXED.
- slightly improvements of skinless mode
- info line can be hide in fullscreen (General Options)
- FileSplit while recording (General Options)
- some options transfered to General Options dialog.
- some changes in remote handling: Cursor Up now switches to next channel by number. Cursor Down switches to previous channel by number.
<< and >> switch channel within one favorite folder.
- Some improvements in DVBCoreES.ax to handle more audio codecs.
- Added graph with Elecard video codec to support aspect ratio.
- decrease lower SR border of SkyStar-1 rev1.6. now 8000Msps instead 12000Msps
- some other bugfixes.
- MDWrapper sources and TestPLG sources now included in distribution.
- added 3rd-party skins. Thank you guys!

Added little utility LNBoff.exe to switch off power supply of LNB for TwinHan and SkyStar-2. Both these cards have a bug: after power PC on they switch power of LNB on. This is a problem when you have other satellite receivers in LNB chain. To switch LNB supply off you may start EzDVB and exit or barely start this utility.

You need re-create your favorite folders again from scratch. I'm sorry
Read !ReadMe&FAQ.txt for new Channel List management

http://www.hippo.ru/~sorgelig/EzDVBxl.v2.45.zip


here are codecs for EzDVB, since EzDVB (v2.40 and up) package hasn't included codecs any more:

http://www.hippo.ru/~sorgelig/Codecs.zip


here is RemoteControl plugin for EzDVB

http://www.hippo.ru/~sorgelig/RemoteControl_DCD.zip



IF YOU HAVE A PROBLEM WITH NVIDIA CODEC THEN USE MY GRAPH ATTCHED

 

[oldgit]

Hi Big Ted,
Thanks very much indeed for that, I'm going to try it tonight. It was a big job, I'm sure many people will benefit from it! Thanks again.
Sincerely,
Richard.

 

[rolfw]

I'll echo that Richard, came just in time as well, I'd installed the nimo codec pack to try and get an AVI file running and it completely buggered the EzDVB beta operation. So I've got it going again with this version.

 

[Big Ted]

Your welcome guys

 

[oldgit]

Hi BT, Sorry mate, I'm being very dim, it won't work for me, when I try to switch video on it says "Cannot find Graph file". I set it to Skystar 1, (mine's a Nexus-s, but Progdvb recognises it as S/S1)
I tried copying the graph file into the root directory, but nothing.........Any ideas to help an old farty???
Sincerely,
Richard.

 

[Big Ted]

Run register filetrs .bat again

Also double click sonic files to reregister

Try that

 

[oldgit]

Hi again, I tried your advice, still have same report, "Cannot find graph"........can one access "Overlay" I can't find it, that fixed it for me in Progdvb??? Any other ideas? Thanks in advance for your help,
Sincerely,
Richard.
PS, the card is receiving something because it's showing "What's on ticker" at the bottom.

 

[Big Ted]

Did you download codecs http://www.hippo.ru/~sorgelig/Codecs.zip and place them in the root directory ?


Also does it work in hardware mode ?

 

[oldgit]

Hi BT, Thanks for coming back! Yes I did put the codecs in, how do you get to "Hardware mode"??
Sincerely,
Richard.

 

[Big Ted]

Ledft hand of twio buttons on bottom right

 

[oldgit]

Hello Ted, That fixed it! Thanks very much for that - it's a nice prog.....
Sincerely,
Richard.