FEC Auto

statalite

statalite

Member
My Satellite Setup
SF8008
DiSEqC motor with 1m dish
Zone 1 @ 28.2°E
Zone 2 @ 28.2°E
Channel Master 1.0m (to be setup)
Channel Master 1.2m (to be setup)
SMR 1224
My Location
UK Midlands
Can anyone advise when I blind scan using an E2 receiver it finds a transponder with FEC auto, on the results list I select scan but the receiver never finds any channels on the 'auto' transponders, why is this?
 
One possible reason could be that your receiver does not support the signal format from the transponder in question.
 
Sofern die beiden Antworten zuvor nicht zutreffen, solltest den manuellen Suchlauf mit den Transponderdaten füttern.

Meine Meinung zu "auto":
Auto ist das deutsche Wort für car und dieses gehört auf die Straße und nicht in Satellit-Settings.

If the two previous answers don't apply, you should perform a manual scan using the transponder data.

My opinion on "auto":
Auto is the German word for car, and that belongs on the road, not in satellite settings.
 
Back
Top