feed horn

G

garryh

Member
My Satellite Setup
1.2meter gregorian dish original 36v positioner motor
twin lnb
Tm 5500 cip plus
Tm9100
Humax hdci200
Silvercrest-SL65 E Dragon cam
Diablo cam
2xSS1 and SS2
V stream dvbt pci
Cas 3
My Location
Scotland
looking to see if any one has a spare feed horn for a fibo 1.2
as my lnb gave up but could not get the screw out to get the lnb of the horn so drilled it and its no good now
any help would be good

cheers garry
 
garryh said:
as my lnb gave up but could not get the screw out to get the lnb of the horn so drilled it and its no good now
any help would be good

cheers garry
Click to expand...

What did you drill exactly, was it just the M5 grub screw and you have ended up with a plain hole. :confused:

If that is the case you could tap the next size up (M6) or fit an M5 heli-coil insert. :)

Picture would help
 
it was the grub screw on the side what holds the lnb flange to feed horn some metal went inside so took the plastic cap of to get it out looks like it is not sealed any more it could be taped but the seal will be gone now on the cap
 
garryh said:
looks like it is not sealed any more it could be taped but the seal will be gone now on the cap
Click to expand...

A case for some silicon sealant :)
 
chees M8
just need a good twin lnb now
 
Back
Top