thanks for the info about the power supply.
I have tryed Dreamup with a USB + Null modem.
It seems the flashing was ok. I have tryed two images the Gemini 4.3 and the ufficial 7025 image but I still have the same problem at reboot.
Not sure what else to try now.
While I had serial connection I have enabled debugging mode via hypertherminal and got the following script. basically this keeps looping over and over again)(-red
+++++++++++++++++++++++++++++++++++++++++++++++++++
1.955 - jffs2 size: 3840 kb
1.958 - network: 1.960 dhcp
2.022 - starting network
2.024 - httpd, telnetd, dreamupd
dreamupd initialized
2.030 - ok. start receiving packets
2.033 - starting dhcp (or manual)
2.037 - network: 2.039 dhcp
2.089 - dhcp started!
2.091 - using jffs2
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
2.253 - load /flash/bootlogo.elf to 82000000
2.258 - using jffs2
2.300 - loading elf image at 82000000
2.312 - jumping to 80401810
2.326 - load /cf/bootlogo.mvi to a2800100
2.330 - load /flash/bootlogo.mvi to a2800100
2.334 - using jffs2
Dreambox DM7025
FIRST STAGE 1.4 {2345}
2ND STAGE OK, build #61 (20080521)
0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
0.786 - config loaded.
* press to enter setup
BUS DEV FUN
--------------------------------------------------
0 a 0 10ec 8139 Ethernet controller
0 14 0 1002 4865 Other multimedia device
0 14 1 1002 4866 IDE controller
0 14 2 1002 4867 Universal Serial Bus
0 14 5 1002 4868 Audio device
0 14 6 1002 4869 Modem
0.830 - ide init
0.831 - IDE found on PCI0:00a1 IO 2210
no CF card detected!
no OLED found!
BOOT #61(20080521)
0.961 - NAND PROBE: 10 10 10 10
0.964 - NAND: trying highspeed...
0.968 - NAND PROBE: ad 75 ad 75 (HS)
0.972 - main control
0.974 - not entering setup
0.977 - execute script: /cf/autorun.bat
0.981 - load /cf/autorun.bat to 834dae68
0.985 - force boot: -1
0.987 - try boot from 1:
0.990 - execute script: /flash/autoexec.bat
0.994 - load /flash/autoexec.bat to 834dae68
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
1.956 - jffs2 size: 3840 kb
1.958 - network: 1.960 dhcp
2.022 - starting network
2.025 - httpd, telnetd, dreamupd
dreamupd initialized
2.030 - ok. start receiving packets
2.034 - starting dhcp (or manual)
2.037 - network: 2.039 dhcp
2.089 - dhcp started!
2.091 - using jffs2
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
2.253 - load /flash/bootlogo.elf to 82000000
2.258 - using jffs2
2.300 - loading elf image at 82000000
2.312 - jumping to 80401810
2.326 - load /cf/bootlogo.mvi to a2800100
2.330 - load /flash/bootlogo.mvi to a2800100
2.334 - using jffs2
Dreambox DM7025
FIRST STAGE 1.4 {2345}
2ND STAGE OK, build #61 (20080521)
0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
0.786 - config loaded.
* press to enter setup
BUS DEV FUN
--------------------------------------------------
0 a 0 10ec 8139 Ethernet controller
0 14 0 1002 4865 Other multimedia device
0 14 1 1002 4866 IDE controller
0 14 2 1002 4867 Universal Serial Bus
0 14 5 1002 4868 Audio device
0 14 6 1002 4869 Modem
0.830 - ide init
0.831 - IDE found on PCI0:00a1 IO 2210
no CF card detected!
no OLED found!
BOOT #61(20080521)
0.961 - NAND PROBE: 10 10 10 10
0.964 - NAND: trying highspeed...
0.968 - NAND PROBE: ad 75 ad 75 (HS)
0.971 - main control
0.974 - network: 0.975 dhcp
1.037 - starting network
1.040 - httpd, telnetd, dreamupd
dreamupd initialized
1.045 - ok. start receiving packets
*** SERIAL SETUP ***
1.100 - entering setup