flash memory

T

tatawinw

Regular Member
Messages
58
Likes
0
#1
i have a problem with my G-Guard 9550 m2 plus. a frienf of me has upgraded it with a wrong software but it is completly dead. nothing on the front panel absolutly nothing. who could tell me what is the problem and how can i solve it?
i will be very grateful for your help.
 
Topper

Topper

Amo Amas Amant Admin
Staff member
Messages
21,894
Likes
3,341
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#2
The problem is your friend go and grab him by the wotsits and tell him if he doesn't return it to the condition it was in you will fry them up infront of him. Unfortunately having had a quick look myself on the web there doen't appear to be much information about this stb. Have you done a Google yourself to see what you can find??
 
O

oskee

Member
Messages
4
Likes
0
#3
tatawinw said:
i have a problem with my G-Guard 9550 m2 plus. a frienf of me has upgraded it with a wrong software but it is completly dead. nothing on the front panel absolutly nothing. who could tell me what is the problem and how can i solve it?
i will be very grateful for your help.
:-Cbigsmil
hello my friend i see you have a big problem,the only way you can restore your receiver is to jtag it.This is only possible if your stb has a jtag connector inside.If there is, you will need the orig jtag file for your receiver so you can upload it via the jtag connector.You will also need a jtag interface cable, but before we talk about this first check if your stb has this jtag connector built into it.

goodluck,:-santa3
oskee
 
T

tatawinw

Regular Member
Messages
58
Likes
0
#4
thank you Oskee for your apprciable help. it is very kind of you. will try to follow your advice.
 
Top